Contents SPECIFICATION II. DIAGRAM OF INSTALLATION . QUICK INSTALL & SETUP 3.1 FRONT & BACK PANEL 3.2 VIDEO SERVER IP SETUP 3.2.1 Run IPCameraSearcher 3.2.2 IPCameraSearcher Instruction 3.3 LOGIN TO VIDEO SERVER ON IE 3.4 INSTRUCTION OF WEB VIEWER IV. SYSTEM SETUP 4.1 STATUS 4.1.1 System Information 4.1.2 Network Status...
Page 4
4.7 DATE & TIME 4.7.1 Current Server Time 4.7.2 Time Zone 4.7.3 Time Mode 4.7.4 Update Server Time V. ADVANCE CONFIGURATION 5.1 MAINTENANCE 5.1.1 Maintain Server 5.1.2 Upgrade Server 5.2 ADMINISTRATOR 5.2.1 User List 5.3 MANAGEMENT 5.3.1 Change Password 5.4 SMTP (E-MAIL) 5.4.1 SMTP Server Settings 5.5 FTP 5.5.1 FTP Settings...
Video Server I. SPECIFICATION MPEG4 / JPEG Compression Resolution 720x480 352x240 Transmission Speed 176x144 Network Protocol TCP/UDP/IP, DHCP,SMTP, HTTP, NTP,DDNS,FTP,TFTP,ARP,nPn,PPPoE File Format MPEG-4/M-JPEG video stream with 2 way 16/24/32/40kbps ADPCM audio Recorded format MPEG-4/M-JPEG video stream with 2 way 16/24/32/40kbps ADPCM audio Motion Detection Movement on image Digital Sensor...
Video Server II. DIAGRAM OF INSTALLATION For Intranet To connect correctly, users and the video server (FUM-T10II) should be in the same network system (intranet) and both ends' IP address should be in the same sub-net. Refer to the installation guide as below: VIDEO IN USER1 USER2...
Video Server III. Quick Install & Setup 3.1 Front & Back Panel 1.VIDEO IN:Video signal input 2.RS-485:RS-485 jack 3.MIC:Microphone input 4.SPEAKER:Speaker output 5.ALARM I/O:Alarm in/out-put connector. Total 10 pins, from left to right: Input x 4 / Output x 3 / GND x 3. 6.DC12V:...
Video Server 3.2 Video Server IP Setup 3.2.1 Run IPCameraSearcher Run IPCameraSearcher.exe, the setup window will appear on you computer Picture 1.2 3.2.2 IPCameraSearcher Instruction 1.Sear h(S):Search all the video servers in the network. Click one of the video server IP address to login. 2.Config IE(C):IE Security Setup.
Video Server 3.3 Login Video Server on IE To Login: 1.In IPCameraSearcher, click the IP address of the indicated Video Server. 2.In IE, type the IP address of the indicated Video Server. Picture 1.3 ※ User name:admin ※ Password:________ (N/A)
Video Server 3.4 Instruction of Web Viewer If login succeeded, the viewer will be appeared as below: Picture 1.4 1.PLAY/STOP:Play/Stop Picture 2.REC:Record the file in AV format.(Refer to 4.2 Video & Audio Settings to customize the file saving path.) 3.SNAPSHOT:Snapshot the picture on screen in a JPG file. (Refer to 4.2 Video &...
Video Server IV. System Setup 4.1 Status Picture 1.4 4.1.1 System Information Firmware Current Version:By updating the firmware, more functions will be attached to the program. 4.1.2 Network Status ˙Ethernet MAC Address:MAC address of the Video Server ˙LAN IP Address:IP address of the Video Server ˙LAN Netmask Address:LAN net-mask address of the Video Server ˙LAN Gateway Address:LAN gateway address of the...
Video Server 4.2 Video & Audio Settings Picture 1.4 4.2.1 Video Settings ˙ CBR:Set the Constant Bit Rate of video ˙Resolution:Picture resolution. Four levels of resolution are provided for selection. ˙Limit Frame Rate to:Frame rate transmitting per second is defined by the internet connection speed. Higher value brings smoother picture performance.
Video Server 4.2.5 Audio Setting ˙Audio Volume:Set audio volume ˙IPcam Audio Enabled:Enable or disable audio function on Video Server ˙PC Audio Enabled:Enable or disable audio function of PC ※2-way talking mode will be activated if both IPcam and the computer enabled audio function.
Video Server 4.4 Wireless LAN * Wireless LAN Card Is Required Picture 1.4 4.4.1 Basic Configuration ˙ Operation Mode:There are two types of wireless network connnection—Infrastructure and Ad-hoc. Infrastructure is connecting via AP ( Access Point) which is considered as the HUB in wired networking system. Ad- hoc is rather exceptional.
Video Server ˙SSID:Service Set Identifier. Identifies different network connection which allows the maximum byte up to 32. When wireless cards are set in different SSID value, the user can access to different networks. SSID is normally broadcasted by AP. In Window XP the user is able to view SSID in current network.
Video Server 4.5 PPPoE Picture 1.4 4.5.1 PPPoE Configuration ˙ Enable PPPoE:Enable or disable PPPoE ˙User Name:Insert the user name from by ISP provider. ˙Password:Insert password from ISP provider ˙MTU (128~1492): Maximum Transmission Unit, the largest packet that can pass onwards in communication protocol, is calculated in bytes of the size.
Video Server 4.6 DDNS Signing up at DynDNS, PeanutHull, or perfecteyes before setting DDNS is required. Picture 1.4 4.6.1 Dynamic DNS ˙ Choose Server:Choose the DDNS server that provided by DynDNS, PeanutHull, and perfecteyes. ˙DNS Account:Account number provided by DDNS server, ex.
Video Server 4.7 Date & Time Picture 1.4 4.7.1 Current Server Time Show current time at the video server. 4.7.2 Time Zone Choose the time zone where the video server is at. 4.7.3 Time Mode When network is functioning, the time can be set according to the server.
Video Server V. Advance Configuration 5.1 Maintenance 5.1 維護&升級 Picture 1.4 5.1.1 Maintain Server ˙ Restart:Restart the Video Server ˙Restore:Restore all settings except IP address ˙Default:Restore all settings 5.1.2 Upgrade Server “ and choose . IMG firmware file , Click browse ”...
Video Server 5.2 Administrator In this section, the user can add, delete, enable/disable use r, and set the camera (video server) name. anonymous Picture 1.4 5.2.1 User List Add or remove users. ˙Add Click to add new users : ˙Remove:Select a user name then click “...
Video Server 5.3 Management Picture 1.4 ˙ User Name:Insert user name ˙Password:Insert new password ˙Confirm Password:Insert again the password to confirm...
Video Server 5.4 SMTP (E-Mail) 5.4.1 SMTP Server Settings Picture 1.4 ˙ Mail Server :Insert IP address of SMTP server ˙From E-Mail Address :Set e-mail address of sender ˙To E-Mail Address :Set e-mail address of receiver ˙Authentication :If authentication is needed, select YES. ˙User Name :User name of E-mail sender ˙Password:Password of the e-mail address ˙Send a test e-mail with SMTP server :Test if the E-mail...
Video Server 5.5 FTP Picture 1.4 5.5.1 FTP Settings ˙ FTP Server:Insert address of FTP Server ˙User Name:Insert user name ˙Password:Insert password ˙FTP Command Port:Insert FTP command port no. ˙Path & File Name:Insert the path to save file name “\”, ‧If the path is ending by a it is a directory path “\”...
Video Server Video Server 5.6 PTZ Settings Picture 1.4 5.6.1 Select PTZ Protocol Protocol:Select Pelco-P or Pelco-D 5.6.2 Select PTZ Baudrate Baudrate:Insert baudrate of PTZ 5.6.3 Set PTZ Address Type your PTZ Address ( 0 ~ 255 :Insert PTZ address (0 ~...
Video Server 5.8 Special Setting Picture 1.4 5.8.1 Video Advance Setting ˙ Compression:Select video compression ˙P/I Ratio P Frame;I Frame :Ration of P frame and I frame ‧Higher number results in smaller transmission size and duller picture. ˙Camera Type: Type of camera AUTO, PAL, NTSC ˙CMOS Frequency:Set CMOS frequency 5.8.2 RGB...
Video Server VI. Mobile Phone View 6.1 JAVA Supported Mobile Phone The mobile phone should be able to support .JPG file, CLDC1.1, or more current version . or MIDP2.0 Remark: ˙MIDP Mobile Information Device Profile , designed for mobile phone and PDA, is the main API specification to support JAVA for mobile phones.
Page 28
Video Server 2.Click program icon to enter main page, enter IP address of IPCAM. Ex. http://192.168.0.168/ Note:A backslash(“/ ” )must be entered 3.Click “1”or“OK” to connect to the video server; click “2”or“Back”(or “EXIT”) to cancel connection server , the v iewing page is as below: After connecting to video :Snapshot (snapshot the current picture) Button...