Contents Important Note Wolf Multi-Function Cooktop ....3 To ensure the safe and efficient use of Wolf equipment, please take note of the following types of highlighted Multi-Function Cooktop Specifications .
Wolf Multi-Function Cooktop wolfappliance.com/specs Multi-Function Cooktop Installation IMPORTANT INSTRUCTIONS IMPORTANT NOTE: Installation of the Wolf gas multi- function cooktop must be completed by a qualified installer. If the information in this guide is not followed Read this entire installation guide prior to installation and exactly, a fire or explosion may result, causing save for the local inspector’s reference.
It is recommended that you use a Wolf cooktop ventilation hood, downdraft, pro hood or hood liner with the multi- function cooktop. Refer to the Wolf design guide.
Multi-Function Cooktop Specifications wolfappliance.com/specs Installation Specifications MULTI-FUNCTION COOKTOP SIDE CABINET 30" (762) min 13" (330) COUNTERTOP TO COMBUSTIBLE 18" MATERIALS (457) min 7" 7" SEE COUNTERTOP (178) TO (178) TO CUT-OUT BELOW COMBUSTIBLE COMBUSTIBLE 4" ( 102 ) 15" 36" (914) (381) FLOOR TO...
Page 6
If the installation exceeds these eleva- Wolf dealer or local gas supplier. To obtain local dealer tions, contact your authorized Wolf dealer for a high information, visit the find a showroom section of our altitude conversion kit.
Page 7
Multi-Function Cooktop Specifications wolfappliance.com/specs Gas Supply Requirements GAS MANIFOLD PRESSURE • Natural Gas: Standard orifices are set for 5" (12.5 mb) The maximum gas supply pressure to the regulator WC. A natural gas pressure regulator is installed. should never exceed 14" (34.9 mb) WC; .5 psi (3.5 kPa). •...
The Wolf multi-function cooktop requires a 120 V AC, WIRING DIAGRAM 60 Hz, 15-amp, fused electrical supply. A time-delay fuse The wiring diagram below covers the control circuit for the or circuit breaker is recommended.
Page 9
When two or more cooktops or modules are installed together, an integrated module filler strip is recommended. The filler strip and other accessories are available through your authorized Wolf dealer. To obtain local dealer informa- tion, visit the find a showroom section of our website, wolfappliance.com.
Multi-Function Cooktop Installation Install the Cooktop Remove the multi-function cooktop and gas pressure Attach the brackets to the burner box by inserting the regulator from its shipping carton and discard packing clips into the rectangular punchouts on the left and right materials.
Page 11
Multi-Function Cooktop Installation wolfappliance.com/specs Install the Cooktop GAS PRESSURE REGULATOR GAS SUPPLY CONNECTION Install the gas pressure regulator with the arrow on the Assemble the flexible metal connector from the gas supply regulator pointing up toward the unit and in a position pipe to the gas pressure regulator.
Page 12
This sparking continues until the electronic ignition senses a Read the entire Wolf multi-function cooktop use & care flame. guide included with the unit. It contains important safety, operation, service and warranty information.
Page 13
Wolf gas multi-function cooktop use & care guide. • If the multi-function cooktop still does not operate properly, contact a Wolf authorized service center. Do not attempt to repair the cooktop yourself. Wolf is not responsible for service required to correct a faulty installation.
If service is necessary, maintain the quality built into your multi-function cooktop by calling a Wolf authorized service center. To obtain the name and number of a Wolf authorized service center, check the contact & support section of our website, wolfappliance.com or call Wolf customer service at 800-222-7820.