Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Security and Protection LTV-DVR-0431
-
Page 1: Digital Video Recorder
Digital Video Recorder Quick Operation Guide UD.7L0202B1228B01... -
Page 2: Dvr Pre-Installation
Quick Operation Guide of LTV-DVR Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. DVR Pre-Installation This Series DVR is highly advanced surveillance equipment that should be installed with care. Please take into consideration the following precautionary steps before installation of the DVR. - Page 3 Quick Operation Guide of LTV-DVR 3. Connect the HDD to the motherboard of the DVR with the included data cable. 4. Connect the power cable to the HDD. 5. Re-install the cover of the DVR and fasten screws.
-
Page 4: Front Panel
Quick Operation Guide of LTV-DVR Front Panel Front Panel 1 Front Panel 2 Table 1 Name Function descriptions USB/absent Connects USB mouse or USB flash memory devices The DIRECTION buttons are used to navigate between different fields and items in menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video. -
Page 5: Rear Panel
Quick Operation Guide of LTV-DVR camera; The F2 button can be used to cycle through tab pages. Enter numeral “4”; Enter letters “GHI”; 4GHI/ESC Exit and back to the previous menu. Enter numeral “5”; Enter letters “JKL”; Delete characters before cursor; 5JKL/EDIT Select the checkbox and ON/OFF switch;... -
Page 6: Peripheral Connections
Quick Operation Guide of LTV-DVR real panel 2 real panel 3 Table 2 Item Description VIDEO IN BNC connector for analog video input. VIDEO OUT BNC connector for video output. AUDIO OUT RCA connector for audio output. AUDIO IN RCA connector for audio input. DB15 connector for VGA output. -
Page 7: Connecting To Alarm Input / Output Device
Quick Operation Guide of LTV-DVR Connecting to Alarm Input / Output Device The alarm input is an open/closed relay. If the input is not an open/closed relay, follow the connection diagram below: To connect to an AC/DC load, use the following diagram: For DC load, JP4 can be used within the limit of 12V/1A safely. -
Page 8: Specifications
Quick Operation Guide of LTV-DVR Specifications Model LTV-DVR-0431-HV LTV-DVR-0432-HV Video input 4хBNC (1.0Vp-p, 75Ω) PAL/NTSC Video/Audio 4хRCA (2.0Vp-p, 1kΩ) Audio input input 1хRCA (2.0Vp-p, 1kΩ) Two-way audio input 1хBNC (1.0 Vp-p, 75 Ω) Video output PAL: 704х576, Resolution NTSC: 704х480 HDMI/VGA output 1 HDMI &... - Page 9 Quick Operation Guide of LTV-DVR LTV-DVR-0831-HV LTV-DVR-1631-HV Model 8хBNC (1.0Vp-p, 75Ω) 16хBNC (1.0Vp-p, 75Ω) Video/Audio Video input PAL/NTSC PAL/NTSC input 4хRCA (2.0Vp-p, 1kΩ) Audio input 1хRCA (2.0Vp-p, 1kΩ) Two-way audio input 1хBNC (1.0 Vp-p, 75 Ω) Video output Video/Audio PAL: 704х576, output Resolution NTSC: 704х480...
- Page 10 Quick Operation Guide of LTV-DVR LTV-DVR-0461-HV LTV-DVR-0861-HV LTV-DVR-1662-HV Model 4хBNC (1.0Vp-p, 8хBNC (1.0Vp-p, 75Ω) 16хBNC (1.0Vp-p, Video/Audi Video input 75Ω) PAL/NTSC PAL/NTSC 75Ω) PAL/NTSC o input 4хRCA (2.0Vp-p, 16хRCA (2.0Vp-p, 8хRCA (2.0Vp-p, 1kΩ) Audio input 1kΩ) 1kΩ) Two-way audio 1хRCA (2.0Vp-p, 1kΩ) input 1хBNC (1.0 Vp-p, 75 Ω) Video output...
- Page 11 Quick Operation Guide of LTV-DVR humidity 1U mini 19", 1U Chassis Dimensions 315×230×45 мм 445×290×45 мм (W × D × H) ≤2 kg (without HDD) ≤4 kg (without HDD) ≤4 kg (without HDD) Weight HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate.
-
Page 12: Menu Operation
Quick Operation Guide of LTV-DVR Menu Operation Menu Structure Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the DVR. Before you start: Check that the voltage of the extra power supply is the same with the device’s requirement, and the ground connection is working properly. -
Page 13: Using The Setup Wizard
Quick Operation Guide of LTV-DVR Click the Yes button. For the DVR, the following message box pops up: Turn off the power switch on the rear panel of DVR. Using the Setup Wizard The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard starts once the device has loaded. - Page 14 Quick Operation Guide of LTV-DVR Click Next button on the Wizard window to enter the Login window. Enter the admin password. By default, the password is 12345. To change the admin password, check the New Admin Password checkbox. Enter the new password and confirm the password in the given fields.
- Page 15 Quick Operation Guide of LTV-DVR Click Next button which takes you back to the Network Setup Wizard window. Set the network parameters, including the NIC type, IPv4 address, IPv4 subnet mask, default gateway, etc. You can enable the DHCP to automatically obtain an IP address and other network settings from that server. Click Next button to enter the HDD Management window.
-
Page 16: Live View
Quick Operation Guide of LTV-DVR Click Next button to enter the Record Settings window. Select the camera to configure. Check the checkbox to enable Start Recording. Select the recording mode to Normal or Motion Detection. Click Copy to copy the record settings of the current camera to other camera (s) if needed. Click OK to return to the Record Settings window. -
Page 17: Using The Mouse In Live View
Quick Operation Guide of LTV-DVR Alarm (video loss, tampering , motion detection or sensor alarm). Record (manual record, schedule record, motion detection record or alarm triggered record) Alarm & Record The sensor alarm and alarm triggered record are supported by DS-7300HWI/HFI-SH models only. Using the Mouse in Live View In the live view mode, use the mouse to right-click on the window to access the following menu: Table 1 Mouse Operation in Live View... -
Page 18: Main/Aux Output Switching
Quick Operation Guide of LTV-DVR Main/Aux Output Switching When the HDMI/VGA output is configured as the main output, you can perform the following operation to switch to CVBS output as the main output. Steps: In the live view mode, use the mouse wheel to double-click on the HDMI/VGA output screen, and the following message box pops up: Use the mouse wheel to double-click on the screen again to switch to the Aux output, or click Cancel to cancel the operation. -
Page 19: Instant Playback By Channel
Quick Operation Guide of LTV-DVR Direction Zoom+, button and the Zoom-, Focus-, Iris- Focus+, Iris+ auto-cycle button The speed of Light on/off Wiper on/off the PTZ movement Image 3D-Zoom Preset Centralization Patrol Pattern Menu Previous item Next item Start pattern/patrol Stop the patrol Minimize Exit... -
Page 20: All-Day Playback By Channel
Quick Operation Guide of LTV-DVR All-day Playback by channel Enter the All-day Playback menu. Mouse: right-click a channel in live view mode and select from the menu. Press PLAY button on the front panel or IR remote control to play back record files of the channel under single-screen live view. - Page 21 Quick Operation Guide of LTV-DVR The channel and time selection menu will display by moving the mouse to the right of the playback interface. Tick the channel or channels if you want to switch playback to another channel or execute simultaneous playback of multiple channels.
- Page 22 Quick Operation Guide of LTV-DVR 2. Set search conditions and click Search button to enter the search result interface. 3. Select record files you want to back up. Click button to play the record file if you want to check it. Check the checkbox before the record files you want to back up.
- Page 23 Quick Operation Guide of LTV-DVR Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”.
Need help?
Do you have a question about the LTV-DVR-0431 and is the answer not in the manual?
Questions and answers