Chevrolet Sonic 2012 Owner's Manual page 238

10-30 Vehicle Care
High Beam Headlamp/
Low Beam Headlamp
1. Open the hood. See Hood on
page 10 4.
2. Remove the headlamp bulb
access cover.
3. Turn the bulb counterclockwise
and pull straight back.
4. Disconnect the wiring harness
connector from the bulb.
5. Install the new bulb in the
headlamp assembly by turning
clockwise.
6. Reconnect the wiring harness
connector.
7. Install the headlamp bulb access
cover.
Parking/Turn Signal Lamp
1. Open the hood. See Hood on
page 10 4.
2. Remove the parking/turn signal
lamp bulb socket from the
headlamp assembly by turning
counterclockwise.
3. Remove the bulb from the bulb
socket by pulling it straight out.
4. Install the new bulb in the bulb
socket.