Great Dane GDWG17KAE Operator's Manual page 28

SERVICE MISCELLANEOUS
yoke and wheel assembly (C).
4. Remove and discard upper (D) and lower (E) bushings.
5. Install new bushings (D and E).
6. Install caster yoke and wheel assembly (C), spacer
bushings (B) and lynch pin (A).
7. Apply grease to lubrication fitting (F).
Checking Wheel Bolts
Tighten rear wheel nuts in an alternating pattern to 68 N•m
(50 lb-ft).
Service Miscellaneous - 25