Panasonic HX-DC2 Basic Operating Instructions Manual page 22

(When [DISP] is selected)
Select the year/month/day display method using the
SET button.
4
Press the SET button.
5
Select [SET DATE AND TIME] using the SET button
and then press the SET button.
≥ To return to the recording screen or playback screen, press the MENU
button.
≥ At the time of purchase, the [CLOCK SET] are not set.
≥ If the date and time have not been set or the built-in clock battery has
run down, the screen display and recording day/month/year
information will appear as follows.
Recording screen display: --.--.---- -:--
Recording day/month/year: 01.01.2012 0:00
≥ To charge the built-in clock battery, install a fully charged battery in the
unit. If you leave the battery in for approximately 2 days, the time
settings will be stored for approximately 7 days. (The charging
continues even when the unit is turned off)
For Australia and New Zealand
WARNING
THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED
BY QUALIFIED PERSONNEL. IF THIS IS NECESSARY, CONTACT
THE PANASONIC CUSTOMER CARE CENTRE ON 132600 FOR
YOUR NEAREST AUTHORIZED SERVICE CENTRE.
22
VQT4D20