Wilson Electronics AG Pro Quint Selectable Installation Manual

Advertisement

Quick Links

Contents:
Contents:
Antenna Options & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick Install Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Finding the Strongest Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Outside Antenna Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing the Inside Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing a Wilson Electronics Signal Booster. . . . . . . . . . . . . . . . . . . . . 9
Powering up a Wilson Electronics Signal Booster . . . . . . . . . . . . . . . . . 10
Button Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Understanding LCD Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Warnings and Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Guarantee, Warranty & Specifications . . . . . . . . . . . . . . . . . Back Cover
Appearance of device and accessories may vary.
Note: This manual contains important safety and operating information. Please read and follow the
instructions in this manual. Failure to do so could be hazardous and result in damage to your Signal
Booster.
AG Pro Quint
TM
Selectable
700 (Band 12 / 17, 13) / 800 /
AWS (1700 / 2100) / 1900 MHz
In-Building Wireless
Smart Technology ™
Signal Booster

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AG Pro Quint Selectable and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wilson Electronics AG Pro Quint Selectable

  • Page 1: Table Of Contents

    Installing the Inside Antenna ........8 Installing a Wilson Electronics Signal Booster..... 9 Powering up a Wilson Electronics Signal Booster .
  • Page 2: Antenna Options & Accessories

    They amplify a weak or shadowed signal in mobile, M2M, marine and in-building applications. When using a Wilson Electronics Signal Booster in conjunction with Wilson Electronics antennas, the Outside Antenna will collect the cell tower signal and send it through the cable to the Signal Booster. The signal is then amplified and re-transmitted through the Inside Antenna into the room.
  • Page 3: Quick Install Overview

    Quick Install Overview See Installation Diagram on page 3 & 4. Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660. Select a location to install the Signal Booster that is away from excessive heat, direct sunlight, moisture and has proper ventilation. Do not place the Signal Booster in an air-tight enclosure.
  • Page 4: Installation Diagram

    Antenna and the Signal Booster. Power Supply Typical Installation Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 am with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST. F i H...
  • Page 5: Before Getting Started

    Before Getting Started This guide will help you properly install your Wilson Electronics Signal Booster. It is important to read through all of the installation steps for your particular application prior to installing any equipment. Read through the instructions, visualize where all the equipment will need to be installed and do a soft installation before mounting any equipment.
  • Page 6 Mount the Outside Antenna as high as possible facing the cell tower in an area with the best possible signal coverage. Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
  • Page 7: Finding The Strongest Signal

    (See graph below). Signal Strength Graph EXCELLENT GOOD POOR SIGNAL -50dB -60dB -70dB -80dB -90dB -100dB -110dB Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
  • Page 8: Outside Antenna Installation

    800-204-4104 to order. To Inside Antenna Signal Booster Surge Protector Power Strip Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
  • Page 9: Installing The Inside Antenna

    Refer to installation diagram on pages 3 & 4. Inside Antenna Ceiling Ceiling Drywall Rafters Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
  • Page 10: Installing A Wilson Electronics Signal Booster

    Warning: An Inside Antenna must have a separation distance from all persons that is at least 8 inches for the Panel Antenna. Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
  • Page 11: Powering Up A Wilson Electronics Signal Booster

    5. Using multiple Signal Boosters in one installation could cause interference to the cell tower. 6. Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email tech@WilsonElectronics.com. Technical Support hours are Mon.- Fri. 7 am to 6 pm MST.
  • Page 12: Understanding Lcd Screen

    ™ Hold “Band Select” for 3 seconds while in 700 if B13 is not selected. A700 AB13 Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
  • Page 13 When the Inside Antenna is too close to the Outside Antenna, the same type of oscillation occurs. Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
  • Page 14: Warnings And Recommendations

    Warning: Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone and/or Signal Booster. Warning: Use only the correct Wilson Electronics power supply. Use of a non-Wilson Electronics product may damage your equipment.
  • Page 15 This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Wilson Electronics could void the authority to operate this equipment.
  • Page 16 Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson Electronics shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.

Table of Contents