Advertisement
Advertisement
Table of Contents
Related Manuals for Worx WG401E
Summary of Contents for Worx WG401E
- Page 1 SAFETY AND OPERATING MANUAL Silent shredder WG401E...
-
Page 2: General Power Tool Safety Warnings
Remember 6) Do not operate the machine on a paved or that operating the starting mechanism on gavel surface where ejected material could engine powered machines will still cause Silent shredder WG401E... -
Page 3: Maintenance And Storage
Wait until all machines 5. ADDItIoNAL SAfety INStRuctIoNS components have completely stopped before touching them. foR uNItS WIth BAGGING AttAchMeNtS 1) Shut-off the power unit before attaching or removing the bag; Do not use as a step RCM approval mark Silent shredder WG401E... - Page 4 Silent shredder WG401E...
-
Page 5: Technical Data
Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Silent shredder WG401E... -
Page 6: Intended Use
The rotational direction switch (8) must be in the position to the right. The feed opening (1) must be empty. Switching on: Press the green button ‘I’ to switch on. Switching off: Press the red button ‘0’ to switch off. Silent shredder WG401E... -
Page 7: Operation
Please keep at safe distance! Insert only as much material as can be fed without stuffing the feed opening (1) . Mulch withered, moist material and garden waste which has been stored for some days alternately with branches. Silent shredder WG401E... - Page 8 (12) is blocked. It is not necessary to loosen and readjust the pressure plate (11). 2. When the caught material is free, switch off machine, set rotational direction switch (8) to the right position and switch back on. Silent shredder WG401E...
-
Page 9: Maintenance
Before storing the machine, remove the cutting roller (as described in the Section “Replacing the Cutting Roller/Pressure Plate”) and clean. Then treat the cutting roller with preservation spray and grease the bearings. Silent shredder WG401E... - Page 12 Copyright © 2013, Positec. All Rights Reserved. 2GLS01APK11005A1...
Need help?
Do you have a question about the WG401E and is the answer not in the manual?
Questions and answers