Grandview 1GD-IRAnIII Operation Instruction

Grandview 1gd-iraniii infrared remote controller

Table of Contents

Download this manual

Enlarged version

GRANDVIEW REPRODUCING GENUINE COLORS

Grandview Crystal Screen Canada Ltd.

#11- 3751 North Fraser Way,

Marine Way Business Centre,

Burnaby, BC, Canada V5J 5G4

Tel: 1-604-412-9777

Fax: 1-604-412-9796

Website: www.grandviewscreen.ca

Guangzhou Grandview Crystal Screen Co., Ltd.

P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,

Shatuo, Panyu District, Guangzhou, Guangdong, China

Tel: +8620-8489-9499 Fax: +8620-8480-3343

Website: www.grandviewscreen.com

GRANDVIEW REPRODUCING GENUINE COLORS

Model：1GD-IRAnⅢ

ISO9001:2000

International Certification

Infrared Remote Controller Operation Instruction

Thank you for choosing the Grandview remote control.

Please read the instructions carefully before using. Keep instructions for future reference.

Table of Contents

Need help?

Do you have a question about the 1GD-IRAnIII and is the answer not in the manual?

Page 1 Model：1GD-IRAnⅢ Grandview Crystal Screen Canada Ltd. #11- 3751 North Fraser Way, Marine Way Business Centre, Thank you for choosing the Grandview remote control. Burnaby, BC, Canada V5J 5G4 Tel: 1-604-412-9777 Fax: 1-604-412-9796 Please read the instructions carefully before using. Keep instructions for future reference.
Page 2 If the remote control can't work properly, please check it according to the following steps. While if you can't find the same symptoms and right way to solve the problems please contact with Grandview's local distributor or our ofter-sales team.
Page 3 Set up for controller's batteries CAUTION Warning: Please do not expose the product in moist place to prevent from potential danger Please change the batteries according to the following steps when the signal of remote of fire or electric shock cotrol becomes weak.
Page 4: Installation Of The Receiver
RS485/RS232 Configuration Installation of the Receiver Central Control Protocol Please read the below instruction before installing the receiver 1. Communication Protocol: Attention: DATA BITS: 8 Digits INTIAL DIGITS: Digit 1 STOP DIGITS: Digit 1 BAUD RATE: 2400 > When installing the receiver, please make sure the cable exit face down to prevent from potential infiltrationwater 2.

1gd-iranii