Page 1
MODAT-335A Field Service Terminal MODEL: MODAT-335A Android-Based Field Service Terminal with 3.5” Touchscreen, TI Sitara™ AM3715 CPU, Wi-Fi, Bluetooth, GPS, Barcode Reader, RFID Reader and Camera User Manual Page I Rev. 1.00 – 5 February, 2014...
Page 2
MODAT-335A Field Service Terminal Revision Date Version Changes 5 February, 2014 1.00 Initial release Page II...
Page 3
MODAT-335A Field Service Terminal Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Page 4
MODAT-335A Field Service Terminal WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
MODAT-335A Field Service Terminal Table of Contents 1 INTRODUCTION......................1 1.1 O ........................2 VERVIEW 1.2 M ....................2 ODEL ARIATIONS 1.3 F ........................3 EATURES 1.4 A ......................3 PPLICATIONS 1.5 E ....................3 XTERNAL VERVIEW 1.5.1 Front Panel ......................4 1.5.1.1 LED Indicators....................
Page 6
4.5 C ........................50 AMERA 4.6 B ................51 ARCODE CANNER ETUP 4.7 RFID R (MODAT-335-AD41-E-R10 O ) ..........52 EADER A SAFETY PRECAUTIONS ..................54 A.1 S .................... 55 AFETY RECAUTIONS A.1.1 General Safety Precautions ................55 A.1.2 Anti-static Precautions ..................56...
Page 7
MODAT-335A Field Service Terminal A.1.3 Product Disposal ..................... 56 A.2 M ............57 AINTENANCE AND LEANING RECAUTIONS A.2.1 Maintenance and Cleaning................57 A.2.2 Cleaning Tools ....................58 B INTERNATIONAL STANDARDS COMPLIANCE ..........59 B.1 EN 60601-1, EN 60601-2 ..................60 B.2 FCC.........................
Page 8
MODAT-335A Field Service Terminal List of Figures Figure 1-1: MODAT-335A .......................2 Figure 1-2: MODAT-335A Front Panel ..................4 Figure 1-3: MODAT-335A Left Panel .....................5 Figure 1-4: MODAT-335A Right Panel ..................6 Figure 1-5: MODAT-335A Top Panel .....................7 Figure 1-6: MODAT-335A Bottom Panel ..................7 Figure 1-7: MODAT-335A Rear Panel....................8 Figure 1-8: MODAT-335A Dimensions (units in mm) ..............11 Figure 3-1: MODAT-335A Mini USB Port ..................19...
Page 9
MODAT-335A Field Service Terminal Figure 4-5: Sound Menu.......................37 Figure 4-6: Display Menu ......................38 Figure 4-7: Storage Menu ......................39 Figure 4-8: Battery Menu ......................39 Figure 4-9: Apps Menu.........................40 Figure 4-10: Location Access Menu ...................41 Figure 4-11: Security Menu......................42 Figure 4-12: Language & Input Menu ..................43 Figure 4-13: Backup &...
Page 10
MODAT-335A Field Service Terminal List of Tables Table 1-1: Model Variations ......................2 Table 1-2: MODAT-335A Specifications ..................10 Table 2-1: Packing List.........................14 Table 2-2: Optional Items List .....................15 Table 3-1: RS-232 Serial Port Pinouts ..................27 Table 4-1: Function Buttons ......................33 Page X...
Bluetooth function allows devices such as headsets and thermal printers to be paired with the MODAT-335A, increasing productivity on the go. 1.2 Model Variations Model Wireless Bluetooth Barcode GPS WWAN RFID 802.11a/b/g/n v4.0 1D/2D MODAT-335-AD41-E-R10 802.11a/b/g/n v4.0 MODAT-335-1D-AD41-R10 Table 1-1: Model Variations Page 2...
MODAT-335A Field Service Terminal 1.3 Features The MODAT-335A features the following: TI Sitara™ AM3715 800 MHz CPU 3.5” sunlight readable TFT LCD touchscreen with stylus input Android 4.1.2 OS Bluetooth v4.0 , 802.11a/b/g/n Wi-Fi and UMTS/HSPA+/GSM/GPRS/EDGE wireless communication technologies GPS supported 13.56 MHz RFID supported 1D laser/2D imager scan engine 3-megapixel CMOS camera with LED flashlight...
MODAT-335A Field Service Terminal 1.5.1 Front Panel The front panel of the MODAT-335A is shown below. Figure 1-2: MODAT-335A Front Panel 1 x Speaker 1 x Microphone 1 x 3.5” TFT LCD (touchscreen) 8 x Function keys 1 x 5D navigation key 1 x Keypad 1 x Home key 1 x Menu key...
MODAT-335A Field Service Terminal 1.5.1.1 LED Indicators The three LEDs on the front panel indicate battery, Wi-Fi status and WWAN status as described in the following table. Battery LED (Right) Wi-Fi LED (Far Left) WWAN LED (Left) Enabled Green Green Green Disabled Orange...
MODAT-335A Field Service Terminal 1.5.3 Right Panel The right panel of the MODAT-335A is shown in Figure 1-4. Figure 1-4: MODAT-335A Right Panel 1 x Power button 1 x Barcode trigger 1 x Camera key 1 x Reset button Page 6...
MODAT-335A Field Service Terminal 1.5.4 Top Panel The top panel of the MODAT-335A is shown below. Figure 1-5: MODAT-335A Top Panel 1 x 1D/2D barcode scanner 1.5.5 Bottom Panel The bottom panel of the MODAT-335A is shown below. Figure 1-6: MODAT-335A Bottom Panel 1 x 16-pin cradle connector Page 7...
MODAT-335A Field Service Terminal 1.5.6 Back Panel The rear panel of the MODAT-335A is shown below. Figure 1-7: MODAT-335A Rear Panel 1 x RFID 1 x LED flashlight 1 x 3-megapixel camera 3 x Barcode triggers 1 x 3000 mAh battery 2 x Lock keys Page 8...
MODAT-335A Field Service Terminal Indicators and Buttons 1 x Battery charging/fully charged LED (orange/green) 1 x Wi-Fi LED (green) LED Indicators 1 x WWAN LED (green) 3 x Barcode trigger keys 1 x Camera key Buttons and Keys 1 x Power button 1 x Reset key I/O Interface 1 x Headset jack...
MODAT-335A Field Service Terminal To unpack the MODAT-335A, follow the steps below: WARNING! Only remove the protective plastic cover stuck to the front screen after installation. The plastic layer protects the monitor surface during installation process. Cut the sealing tape. Only cut deep enough to cut the tape. Step 1: Open the box.
MODAT-335A Field Service Terminal Quantity Item Image USB cable (P/N: 32001-000300-200-RS) Power adapter (P/N: 63040-290013-000-RS) Headset (P/N: 30900-000003-RS) Hand strap (P/N: 46035-000300-RS) Stylus (P/N: 7Z000-6051D0320101-RS) Sling for the stylus (P/N: 46035-000200-RS) Belt clip case (P/N: 46037-000200-RS) Utility CD Table 2-1: Packing List Page 14...
MODAT-335A Field Service Terminal 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the MODAT-335A may result in permanent damage to the MODAT-335A and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the MODAT-335A.
MODAT-335A Field Service Terminal Anti-static Discharge: If a user open the rear panel of the MODAT-335A, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear and anti-static wristband. 3.3 Charging the System NOTE: Before using the MODAT-335A for the first time, the battery must be charged for at least 4 hours.
MODAT-335A Field Service Terminal Figure 3-1: MODAT-335A Mini USB Port Connect the other end of the USB cable to the USB connector of the power Step 3: adapter (Figure 3-2). Then plug the power adapter to a power source. Figure 3-2: Connecting the USB Cable to the Power Adapter The battery LED lights up in orange to indicate that the battery is charging Step 4: (Figure 3-3).
MODAT-335A Field Service Terminal Figure 3-3: Battery Charging LED 3.3.1 Using the Optional Cradle To charge the MODAT-335A using the optional charging cradle, follow the steps below. Connect the Mini USB plug of the USB cable to the rear side of the charging Step 1: cradle (Figure 3-4).
MODAT-335A Field Service Terminal Insert the MODAT-335A into the cradle to start charging the battery (Figure 3-5). Step 3: Step 0: Figure 3-5: Inserting the MODAT-335A to the Charging Cradle 3.4 Installing the Optional Barcode Trigger Grip The optional barcode trigger grip allows users to easily hold the MODAT-335A when scanning barcodes.
MODAT-335A Field Service Terminal Figure 3-6: Barcode Trigger Grip Installation With the barcode trigger grip, the user can easily hold the MODAT-335A when Step 4: scanning barcodes. Figure 3-7: MODAT-335A with the Barcode Trigger Grip Page 22...
MODAT-335A Field Service Terminal 3.5 I/O Connectors The I/O connectors on the left panel are protected by rubber covers. Open the rubber cover before connecting any peripheral devices to the MODAT-335A. 3.5.1 Headset Jack The headset jack on the left panel enables the MODAT-335A to be connected to the supplied headset.
MODAT-335A Field Service Terminal Connect the other end of the cable to the USB connector of a computer. Step 3: Tap USBMode on the application page, then select USB Client as the USB Step 4: connection mode (Figure 3-9). Figure 3-9: USB Client When the MODAT-335A is connected to a computer, the screen in Figure 3-10 Step 5: should be displayed on the MODAT-335A.
MODAT-335A Field Service Terminal Figure 3-10: USB Mass Storage Screen 3.6 Docking Cable I/O Connectors (Optional) The optional docking cable extends the capabilities of the MODAT-335A, including an RS-232 serial port, a USB client plug and a USB host connector. Figure 3-11: Docking Cable Connection Page 25...
MODAT-335A Field Service Terminal 3.6.1 RS-232 Serial Port The MODAT-335A docking cable has a male DB-9 connector that provides connection to an RS-232 serial device. Follow the steps below to connect a serial device to the MODAT-335A. Locate the DB-9 connector. The location of the DB-9 connector is shown in Step 1: F igure 3-11.
MODAT-335A Field Service Terminal Description Description Table 3-1: RS-232 Serial Port Pinouts Figure 3-13: Serial Port Pinouts 3.6.2 USB Client Plug The USB client plug of the docking cable connects the MODAT-335A to a computer. Follow the steps below to connect the MODAT-335A to a computer. Align the connectors.
MODAT-335A Field Service Terminal Once aligned, gently insert the USB plug into the USB connector of the Step 2: computer. Tap USBMode on the application page, and then select USB Client as the USB Step 3: connection mode (Figure 3-9). When the MODAT-335A is connected to a computer, the screen in Figure 3-10 Step 4: should be displayed on the MODAT-335A.
MODAT-335A Field Service Terminal Figure 3-15: USB Host Mode Refer to Section 4.4 to find the folder of the connected USB device. Step 4: 3.7 Powering On/Off NOTE: Before using the MODAT-335A for the first time, the battery must be charged for at least 4 hours.
MODAT-335A Field Service Terminal Figure 3-16: Power Button Powering Off: Press and hold the power button until the message window as shown in Figure 3-17 appears. Select OK to turn off the MODAT-335A. Figure 3-17: Power-off Confirmation Screen NOTE: When the MODAT-335A is powered on, press the power button once to suspend the MODAT-335A or to resume from the suspend mode.
MODAT-335A Field Service Terminal 3.8 Resetting the System CAUTION: Resetting the MODAT-335A may result in losing unsaved data. Before resetting the MODAT-335A, remember to backup unsaved data. To reset the MODAT-335A, insert the tip of the stylus or a ballpoint pen into the reset button (Figure 3-18).
MODAT-335A Field Service Terminal 4.1 Function Buttons The MODAT-335A has several function buttons on the system front panel and the Android home screen to control the system. The function buttons are shown in Figure 4-1 and described in Table 4-1. Figure 4-1: Function Buttons Buttons Description...
MODAT-335A Field Service Terminal 4.2 Home Screen The MODAT-335A has multiple home screens allowing users to customize the screen with widgets, apps, folders and shortcuts. Swipe left or right to switch between home screens. To add shortcuts and widgets on the home screen, simply long press an app/widget icon in the Launcher.
MODAT-335A Field Service Terminal 4.3 Settings The Settings menu allows configuration to the MODAT-335A, such as Wi-Fi, volume, display brightness, etc. To enter the Settings menu, tap Settings on the launcher page. 4.3.1 WIRELESS & NETWORKS Figure 4-3: Wireless and Networks Settings In the WIRELESS &...
MODAT-335A Field Service Terminal 4.3.1.1 More Settings Figure 4-4: More Settings Menu After tapping More… in the WIRELESS & NETWORKS field, the user can configure the following network settings. Airplane mode: Turns on or off the airplane mode. VPN: Sets up and manages Virtual Private Networks (VPNs). Portable hotspot: Allows the user to set this device as a portable Wi-Fi hotspot and to configure the hotspot settings.
MODAT-335A Field Service Terminal 4.3.2 Sound Figure 4-5: Sound Menu Use the Sound menu to configure the following items. Silent mode: Turns on or off the silent mode. Volumes: Adjusts the volume of alarms, notifications, music, video, games and other media.
MODAT-335A Field Service Terminal 4.3.3 Display Figure 4-6: Display Menu Use the Display menu to configure the following items. Brightness: Adjusts the screen brightness. Wallpaper: Sets up the wallpaper. Sleep: Sets up the time of inactivity after which the screen turns to sleep mode. Font size: Sets up the font size.
MODAT-335A Field Service Terminal 4.3.4 Storage The Storage menu displays the status of the internal storage and the inserted microSD card, and allows users to manage the data stored in them. Figure 4-7: Storage Menu 4.3.5 Battery The Battery menu displays the battery status. Figure 4-8: Battery Menu Page 39...
MODAT-335A Field Service Terminal 4.3.6 Apps The Apps menu displays the applications installed in the device, and allows users to manage them. Figure 4-9: Apps Menu Page 40...
MODAT-335A Field Service Terminal 4.3.7 Location Access Figure 4-10: Location Access Menu Use the Location access menu to configure the following items. Access to my location: Turns on to let the apps obtain the user’s location information. GPS satellites: This item is available only when the Access to my location item is enabled. Enabling this item allows the apps to use the GPS in the device to pinpoint the user’s location.
MODAT-335A Field Service Terminal 4.3.8 Security Figure 4-11: Security Menu Use the Security menu to configure the following items. Screen lock: Sets up the way to unlock the screen. Owner info: Enables to show the information of device owner on the lock screen. Make passwords visible: Enables to show password when typing.
MODAT-335A Field Service Terminal 4.3.9 Language & Input Figure 4-12: Language & Input Menu Use the Language & input menu to configure the following items. Language: Sets up the language for MODAT-335A. Spell checker: Allows the user to enable the spell checking function and to configure its settings.
MODAT-335A Field Service Terminal 4.3.10 Backup & Reset Figure 4-13: Backup & Reset Menu Use the Back & reset menu to configure the following items. Factory data reset: Erases all data from the internal storage of the MODAT-335A. 4.3.11 Add account Tap Add account to start setting up an e-mail or corporate account.
MODAT-335A Field Service Terminal Figure 4-14: Add Account Menu 4.3.12 Date & Time Figure 4-15: Date & Time Menu Use the Date & time menu to configure the following items. Page 45...
MODAT-335A Field Service Terminal Automatic date & time: Turns on to use the network-provided time. Automatic time zone: Turns on to use the network-provided time zone. Set date: Sets up the date. Set time: Sets up the time. Select time zone: Sets up the time zone.
MODAT-335A Field Service Terminal Auto-rotate screen: Turns on or off the auto-rotate function of the screen. Speak passwords: Turns on or off the speak password fucntion. Text-to-speech output: Configures the text-to-speech settings. Touch & hold delay: Configures the touch & hold delay settings. Enhance web accessibility: Turns on to allow apps to install scripts from Google that make their web content more accessible.
MODAT-335A Field Service Terminal 4.3.15 About Tablet Figure 4-18: About Tablet Menu Use the About tablet menu to display the following items. Status: Taps to display the status of batteries, network, signal, etc. Legal information: Taps to display the legal information. Model number: Displays the model number.
MODAT-335A Field Service Terminal 4.4 File Manager The MODAT-335A provides a file management tool that allows users to manage files in the internal storage and external storage device. Tap OI File Manager on the application page to launch it. Figure 4-19: OI File Manager Tap storage (Figure 4-19) to view the possible storage devices listed below.
MODAT-335A Field Service Terminal Figure 4-20: Possible Storage Devices Tap a storage device to display its contents if available. 4.5 Camera The MODAT-335A equips with a 5-megapixel camera with flashlight. Tap Camera on the application page to launch it. Figure 4-21: Camera Application Page 50...
MODAT-335A Field Service Terminal 4.6 Barcode Scanner Setup Tool The MODAT-335A provides a barcode scanner setup tool that allows users to configure the barcode scanner settings. Tap Bar Code Reader on the application page to launch it. Figure 4-22: Barcode Reader Setup Tool to enter the setup page.
Preamble/Postamble: Taps to add the setup string before or after the scanned barcodes. 4.7 RFID Reader (MODAT-335-AD41-E-R10 Only) To use the RFID reader, follow the steps below. Go to Settings > More…, and tap NFC to turn on the RFID function.
MODAT-335A Field Service Terminal WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the MODAT-335A. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.
MODAT-335A Field Service Terminal A.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the MODAT-335A may result in permanent damage to the MODAT-335A and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the MODAT-335A.
MODAT-335A Field Service Terminal Outside the European Union - If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method. Within the European Union: EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.
MODAT-335A Field Service Terminal A.2.2 Cleaning Tools Some components in the MODAT-335A may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the MODAT-335A. ...
MODAT-335A Field Service Terminal B.1 EN 60601-1, EN 60601-2 The LCD monitor complies with the EN 60601-1 and EN 60601-2 of related European standards. B.2 FCC We hereby declare that the equipment specified above conforms to the technical standards as specified in the FCC Rules. Page 60...
MODAT-335A Field Service Terminal C.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
Page 73
MODAT-335A Field Service Terminal Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Biphenyls Diphenyl (Pb) (Hg) (Cd) Chromium (CR(VI)) (PBB) Ethers (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply Assemblies Battery This toxic or hazardous substance is contained in all of the homogeneous materials for the part is...