Razor POCKET ROCKET Battery Installation Instructions page 2

Step 3
Locate the white plastic connector that leads to
the battery and disconnect by depressing the tab.
Step 5
Using both hands, carefully remove the batteries
from the battery tray. See page 3 for battery care
and disposal information.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Figure 3
Figure 5
Step 4
Using a 4mm Allen wrench, loosen the two bolts
on the battery bracket and remove the bracket
from the battery.
Step 6
Reverse steps:
1. Place the new battery inside battery tray.
2. Re-fasten the battery bracket around the battery
using the two bolts.
3. Reconnect the white battery plastic connector.
4. Reattach fairings on unit using previously
removed bolts.
ATTENTION: Charge unit at least 18 hours
before riding.
Figure 4
2