Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ACTi SED-3300
- Page 1 Video Transcoder SED-3300 Ver.061031 Quick Installation Guide...
-
Page 2: Getting Started
Getting Started PACKAGE CONTENTS SED-3300 Warranty Card Product CD Terminal Blocks & Screws Power Adaptor (Option) -
Page 3: Physical Description
1.2 PHYSICAL DESCRIPTION Read the following information to familiarize yourself with the video transcoder, and make particular notes of where the connectors and LEDs are located. Front Panel Red LED LED Indicating Power or H/W Reset Function Yellow LED LED Indicating when RS-485 Rx is active Green LED LED Indicating when RS-485 Tx is active Reset Button... -
Page 4: Digital Output
Terminal Blocks Pin 1~6 NAME DESCRIPTION Digital Output 1 Digital Output 2 Ground Pin Digital Input 1 Digital Input 2 Ground Pin Terminal Blocks Pin 7~12 Pin 7~10: RS232/422/485. Default mode is RS-485 (if your system needs RS-232 or RS-422, please contact our sales) DESCRIPTION NAME... - Page 5 Rare Panel Dip Switch or Serial Port RS-485 or RS-422 pin degine (default is RS-485) RS-232 pin define Analog Video Output of Y/C Signal with S-Video Connector Composite Analog Video Output of Composite Signal with BNC Connector...
- Page 6 1.3 CONNECT NECESSARY CABLES Follow the procedures below to connect the video transcoder to the respective apparatuses. 1. The IP camera or other encoding devices as a video source 2. The video server or other encoding devices as a video source 3.
-
Page 7: Quick Tour
Quick Tour This section guides you with a quick tour on our video transcoder. 2.1 Configure the video transcoder 2.1.1 Make sure network environment Default IP of video transcoder is 192.168.0.200. Please make sure the video transcoder and your PC are on the same network segment before running the installation. - Page 8 2.1.2 Open Internet Explorer with IP address This section describes how to configure the video transcoder. The product administrator has unlimited access to all setup windows and normal users can only watch the live images. The video transcoder is configured under a standard browser (Microsoft Internet Explorer 6.0 or above). Follow the procedures below to configure the video transcoder.
- Page 9 2.1.3 Set a new IP address *Host Name : Enter a domain name. The default Host Name is ACTi. *Language : Language setting for Web Configurator. The default setting is English. *IP Address : The IP address of the LAN interface. The default IP address is 192.168.0.200.
- Page 10 2.1.4 Select a video server / IP camera This section tells you how to setup video server or IP camera’s video and streaming settings. *Protocal Version Select : Select protocol version 1.0 or protocol version 2.0 *Patrol Channel Select : Select channel number to be patrolled *Connect Type : Select Multicast or TCP mode for connecting to a video server/IP camera.
- Page 11 *Multicast Connect IP: Set IP address of video server / IP camera while Connect Type is Multicast streaming. *Connect User Name : Set Login Name of video server / IP camera. *Connect Password : Set Password of video server / IP camera. *Click button NOTE:...
Need help?
Do you have a question about the SED-3300 and is the answer not in the manual?
Questions and answers