Nikon COOLPIX P5100 User Manual page 127

Shooting Options: The Shooting Menu
Focus mode
[~ Infinity] is not available when [Continuous] is set to [Continuous flash]. If
[Continuous] is set to [Continuous flash] while focus mode is set to [~ Infinity], the
focus mode setting automatically switches to
[AF
Autofocus].
When [Face priority] is selected for [AF area mode], setting focus mode to [~
Infinity] changes [AF area mode] to [Auto]. Selecting an option other than [~
Infinity] for focus mode restores [AF area mode] to [Face priority].
Optimize image
Selecting [Black-and-white] for [Optimize image] changes [White balance] to [Auto].
Selecting an option other than [Black-and-white] for [Optimize image] restores the
original [White balance] setting.
Enabling the [B&W
+
color] option (V') for the [Black-and-white] item in the
[Optimize image] menu changes the [Continuous] setting to [Single] and the [Auto
bracketing] setting to [Off]. These [Continuous] and [Auto bracketing] settings do
not change when the [B&W
+
color] option is disabled.
ISO sensitivity
When [ISO sensitivity] is set to [3200], [Image size] cannot be set to [~4000x3000],
[~ 3264x2448],
[Ej
3984x2656], [~ 3968x2232], and
[l!}
2992x2992]. At these
image size settings, selecting [3200] for [ISO sensitivity] automatically switches the
[Image size] setting to [~ 2592x 1944]. When any option other than [3200] is next
selected for [ISO sensitivity], the original image size setting is restored.
At an [ISO sensitivity] setting of [3200], the [Multi-shot 16] option of the continuous
shooting mode is not available. At a [Continuous] setting of [Multi-shot 16],
selecting [3200] for [ISO sensitivity] switches the [Continuous] setting to [Single].
The [Continuous] setting does not change even when [ISO sensitivity] is set to
options other than [3200].
Continuous
Selecting an option other than [Single] for [Continuous] turns [Auto bracketing] off.
Selecting [Multi-shot 16] changes image quality setting to [~~~ Normal] and image
size setting to [~ 2592x1944].
Auto bracketing
When [Auto bracketing] is enabled, [Continuous] will be set to [Single] and the flash
mode will be disabled (~).
Noise reduction
When [Auto] of [Noise reduction] is applied with [Continuous] set to an option
other than [Single] or [Intvl timer shooting], or with [Auto bracketing] set to an
option other than [Off], noise reduction will not be performed. Selecting [On] for
[Noise reduction] changes [Continuous] to [Single], when an option other than
[Intvl timer shooting] is selected for [Continuous], and [Auto bracketing] to [Off].
773