Turn off:
=
When turn off, press
will become from red shinning to red, means get into state of waiting, and visual
presenter has been turned off. If visual presenter has central controller function,
when turn visual presenter off, press this button
"Bee", power indicator shines fastly, meanwhile visual presenter can not be
controlled by any button. When power indicator gets into shining slowly,
press
again to turn off projector. After 2 minutes of "Bee", it is into state of
waiting, at same time projector's power has been cut down (delayed to turn
off).
When it is into state of turning off,visual presenter will switch "PC IN" (PC's
signal) into monitor automatically. (It is get through without signal of turning on).
Lamp Selection:
=
Press
button, users can turn on/off assitant lamps or baselight.
Preview/shooting:
=
Signal output to monitor
select visual presenter's signal, PC signal, and RGB signal's input. When select
visual presenter's signal, the indicator will become red
off
when select PC signal input
) ,
will be off
when select RGB signal input
) ,
previewing indicators will be off
2 seconds, after heard of a voice of "Bee", this indicator
preview
(
the indicator will be on red
,
).
- 10 -
2 seconds, after a voice of
Press this button repeatedly to
):
other two indicators will be
(
the indicator will be red
,
other two indicators
(
other two
(