Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for La San Marco SM91
Summary of Contents for La San Marco SM91
- Page 1 MACINADOSATORE SM91-SM96 - SMMK - SMFK MACINADOSATORE SM 91-96-MK-FK GRINDER-DISPENSER SM 91-96-MK-FK MOULIN DOSEUR SM 91-96-MK-FK DOSIERMÜHLE SM 91-96-MK-FK MOLINILLO-DOSIFICATOR SM 91-96-MK-FK MOINHO-DOSEADOR SM 91-96-MK-FK ¢O™IMETPIKO™ MY§O™ KAºE SM 91-96-MK-FK...
- Page 2 GRINDER-DISPENSER SM 91-96-MK-FK...
-
Page 3: Table Of Contents
General Notes General notes ........pag. 15 1.1 The espresso coffee . -
Page 4: General Notes
"continuous serving" models with hydraulic unit, and to the manual piston type (known as lever operated). La San Marco S.p.A. grinder-dispensers are profes- sional devices designed and built to be used with this type of espresso coffee machine. -
Page 5: Introduction
The La San Marco S.p.A. grinder-dispenser must be used in the manners described in this manual; all other improper or inappropriate uses of this device void the war- ranty conditions and the liability of the manufacturer. -
Page 6: Technical Characteristics
3. Technical characteristics 3.1 General characteristics of the different models SM MK and SM FK, in which the standard housing is provided with a base 2 that contains the electrical and electronic components. hoppers of similar shape, of 4.6 and 6 litre capacity respectively, are available. The 4.6 litre hopper 6 has a capacity of 1.73 kg of coffee beans;... -
Page 7: Machine Assembly
3.3 Machine assembly 3.4 Legend... -
Page 8: Installation
La San Marco S.p.A. declines any liability if the prescriptions of the law are not complied with. An improper installation can cause damage or personal in-jury, for which the manufacturer cannot be considered liable. -
Page 9: Programming The Grinding Time
4.3 Programming the grinding time The electronic control unit controls the grinding time and restarts the grinder-dispenser after a certain number of batches of ground coffee are dispensed. The unit is programmed by the manufacturer according to preset values (see table). The grinder-dispenser, started with the push button 3, remains active and stops at the end of the preset grinding time or is stopped by the action of the BATCHES OF overflow limit switch, which resets the timer. -
Page 10: Pag
Unscrew the upper grinder support and remove it from its seat. Replace the grinders and align the lower grinder with the three scraping teeth (the distance from these teeth is 0,9 mm; to center the machine we suggest using a thickness gauge). Clean the grinder seats and the thread of the upper grinder support accurately. -
Page 11: Warranty
8. Declaration of conformity La San Marco S.p.A. declares under its own responsibility that the espresso coffee machine described in this manual and identi- Gradisca d’Isonzo, February 2009... -
Page 12: Problem Solving
If it is not possible to solve the problem as suggested, or if problems other than those described above occur, please contact the La San Marco S.p.A. authorized technical service centre. should they become necessary, without advance notice. - Page 13 La San Marco S.p.A. Via Padre e Figlio Venuti, 10 34072 Gradisca d’Isonzo - Gorizia - Italy Tel. +39.0481.967111 Fax +39.0481.960166 http://www.lasanmarco.com E-mail: info@lasanmarco.com...
Need help?
Do you have a question about the SM91 and is the answer not in the manual?
Questions and answers