Operation The Technovision IM24 samp ling system allows direct disc access on 24 Table of Contents individual CDs. The IM24 package includes a control panel and a proprietary 2-way control interface mounted within the 25 discs CD changer. It also comes with a built in statistics program to gather and Operation..................
IM24 Operating Guide Retrieval of Statistics On the back of the control panel, you will find two small switches. (See below). General Specifications Unplug the power to the control panel. • Volume up and down button is active at all times.
No…..read below of CD facing the right hand side of player, only one CD per slot) IM24 panel needs to be sent to us for repairs. If listening post still doesn’t work even after following the above steps, Still no sound? Now you need to check the Amplifier.
Is the amplifier set to monitor mode? (Monitor displayed in 3. My tracks won’t change: red on amplifier display) Yes…read below CONTROL PANEL-Ensure your cables are connected Monitor mode needs to be turned off. Press the monitor mode securely. If so, then try the button test: button.
Amplifier should be set to “CD” and the CD player should not be set in 10. Panel on the door is flashings numbers: repeat or random mode with the latest IM24 firmware (older IM24 Check the Dip Switches on the back of the control panel. The unit is firmware may set the player to random mode).
REPLACING THE AMPLIFIER REPLACING THE CD PLAYER • Open the machine. • Open the defective CD player and remove CD’s if CD’s are not jammed. • Turn the power bar off. • Turn the power bar off. • Remove screws holding down chrome straps over the CD player and •...
REPLACING THE CONTROL PANEL • Open the door to the Listening Post. • Turn off the power to the Listening Post. • Unplug all six cables from the control panel. • Unscrew the four screws that hold the control panel to the front door. •...
Need help?
Do you have a question about the IM24 and is the answer not in the manual?
Questions and answers