Download Print this page
Barbarian line BB-9064-MPR Owner's Manual

Barbarian line BB-9064-MPR Owner's Manual

Open full rack pro-line

Advertisement

Quick Links

AUFBAUANLEITUNG
OWNER`S MANUAL
BB-9064-MPR Open Full Rack PRO-Line
1

Advertisement

loading

Summary of Contents for Barbarian line BB-9064-MPR

  • Page 1 AUFBAUANLEITUNG OWNER`S MANUAL BB-9064-MPR Open Full Rack PRO-Line...
  • Page 2 Use of equipment only for the designated purpose. The stated load limits are not to cross. Variations in implementation and measurement are possible. Subject to change, they always serve to improve the device. ©2010 IFS GmbH - All rights reserved. BB-9064-MPR Open Full Rack PRO-Line...
  • Page 3 (approach is described in the illustrated assembly instructions). If the steel cable shows damages stop training and exchange steel cable. Risk of injury for non-compliance! Worn or defective parts are a security risk and should be exchanged immediately! No workout for defects on the device! BB-9064-MPR Open Full Rack PRO-Line...
  • Page 4 It´s very important to check the steel cable binding to rubber buffer. Please note the appropriate references in the assembly instruction, generally as well as the references with maintenance and servicing concerning the steel cable. If you still have problems please contact your dealer. BB-9064-MPR Open Full Rack PRO-Line...
  • Page 5: Stückliste Part List

    Rubber-Shoe 160x130mm Safety-Barbell-Catcher (LEFT) Safety-Barbell-Catcher (RIGHT) Screw M12x100mm Screw M12x30 Square End-Cap 75x75mm Strap-Rubber-Bumper, 300*40*10mm Strut Thread-forming countersink screw 4,2 x16mm Upper Cross-Connector Upright front Upright rear Washer M12 Washer M12 Ødx3 Weight-Tree (LEFT/RIGHT) Weight_Horn Ø30x290mm BB-9064-MPR Open Full Rack PRO-Line...
  • Page 6: Datenblatt Data Sheet

    DATENBLATT DATA SHEET Gesamtgewicht: ca. 160 KG Gross Weight: ca. 160 KG BB-9064-MPR Open Full Rack PRO-Line...
  • Page 7 STEP - 1 BB-9064-MPR Open Full Rack PRO-Line...
  • Page 8 Montageschritte eventuell wieder gelöst werden um die Bauteile exakt ausrichten können. Tighten screws only slightly. Screws must be in the course of the subsequent assembly steps may be solved again to align the components accurately. BB-9064-MPR Open Full Rack PRO-Line...
  • Page 9 STEP - 3 BB-9064-MPR Open Full Rack PRO-Line...
  • Page 10 STEP - 4 Alle Teile exakt ausrichten und sämtliche Schrauben festziehen. All parts accurately align and tighten all screws. BB-9064-MPR Open Full Rack PRO-Line...
  • Page 11 STEP - 5 BB-9064-MPR Open Full Rack PRO-Line...
  • Page 12 STEP - 6 BB-9064-MPR Open Full Rack PRO-Line...