Page 2
INSTRUCTIONS FOR SAFE USE IMPORTANT! KEEP FOR FUTURE REFERENCE • WARNING: Do not leave the child unattended. • WARNING: Ensure that the harness is correctly fitted and adjusted when the child is in the highchair. • WARNING: Do not use the highchair unless all components are correctly fitted and adjusted.
COMPONENTS Seat and tray x1 Rear leg right x1 Rear leg left x1 Front leg right x1 Front leg left x1 After sales Service: If you need assistance, spare parts or you are unhappy with any aspect of the goods please contact Customer Care on: +44 (0)845 268 2000, or e-mail us at: customer.care@mamasandpapas.
Page 4
ASSEMBLING THE SEAT A: Slide the arms into the back of the high chair. B: Press down on the silver spring clips and push the tray into place. C: Push the tray until the spring clips lock into place. -4- -4-...
Page 5
ASSEMBLING THE FRAME A1: Slide the rear left Front leg connector leg into the rear right leg until the pin springs Rear leg connector through the location hole (fig 1). A2: Slide the front left fig 1 leg into the front right leg until the pin springs through the location hole (fig 1).
Page 6
SECURING THE TRAY A: Ensure tray is locked securley in position. B: For extra security fasten all straps located on the underside of the tray to seat section. -6- -6-...
Page 7
USING AND ADJUSTING THE HARNESS Never place your child in the seat without fitting and adjusting the safety harness. A: Locking the harness. Push the shoulder strap catch 1 into the locking catch 2 until it clicks into place. Repeat the process for the lock on the other side.
Need help?
Do you have a question about the din dins and is the answer not in the manual?
Questions and answers