Table of Contents
Advertisement
Quick Links
Function:
HD 720P video mode( 1280x720@30fps)
VGA video mode (640x480@60fps)
Camera mode 5/3/1.3 Mega Pixel
Sound recording mode
Loop recording mode
PC-cam mode: 1280x720 30fps, VGA@60fps
TV-Cam mode: 1280*720 30fps, VGA-60fps
Extension power support
AV-output
Supported TF card up to 32GB
Chapter 1: Getting Started
HQ 30 Overview
This guide describes the features of HQ30.
Status icons
The icons in the status spot on the device give information about HQ30.
Status icon
Red light
Charger mode You're charging when the Red one lighting and stop full charged.
Green light
Yellow light
808 HQ30 HD Video Recorder
Instruction Manual
HD 720P 30fps & VGA 60 fps
Video mode
Video mode
What it means
720P Video
VGA Video
Advertisement
Table of Contents
Summary of Contents for MSUN INDUSTRIAL HQ30
- Page 1 Chapter 1: Getting Started HQ 30 Overview This guide describes the features of HQ30. Status icons The icons in the status spot on the device give information about HQ30. Status icon What it means Red light Charger mode You’re charging when the Red one lighting and stop full charged.
-
Page 2: Getting Started
Connecting cable. Using USB Cable to connect your computer to sync and charge. HQ 30 car charger. Using with USB Cable to charge the HQ30 battery when you are driving. Multi-function AV cable. To charge your HQ30,as well as TV video and audio output. -
Page 3: How To Use
pictures as well as record whatever sound you like. How to use Shoot 720p videos Press the POWER/MODE button, then the light is on, Press the POWER/MODE button, switch to the green light is on Next, press the SHUTTER button to start recording. (the light will blink three time and off, that mean the device under recording.) Finally, press the SHUTTER button again. - Page 4 Read memory card via your PC Using USB cable to connect your PC/laptop, press the POWER/MODE button to start the unit, in this case, your computer can read your card. Read content via your TV 1，At shut off status, use TV-Out cable to TV, the yellow RCA connected to TV video input port, the white RCA connected to audio input, turn on the TV to choose to corresponding Input Interface, start the unit by press the POWER button, the TV will display the video or photo content in the memory card, press the POWER button to browse the next file, if it is a video or audio file, please press the SHUTTER...
- Page 5 led=1 values =0 /1 // Set record LED whether flashing 0=off, 1=open vol=3 values =0 /3 // Set record whether sound 0=No sound, 3=ON start=1 values =0/1 //Set Press power key immediately record 0=N, 1=Yes Standby time 1=30s 2=1m 3=3m 4=5minutes sleep=1 values =1/2/3/4 // Set...
Need help?
Do you have a question about the HQ30 and is the answer not in the manual?
Questions and answers