Omega OC64TZ Operating And Installation Instructions page 15

Minute Minder
No matter whether a heater is activated or not, the minute minder can be
operated by touching
the dot in the right Timer Display indicates that
for setting the timer value.
The minute minder is selected when all Cooking Zone Indicators are statically
on or off (no Cooking Zone Indicator is flashing).
With and , the timer value can be set.
After successful setting of the minute minder time, the timer starts to
decrement the time.
The minute minder will not be stopped by switching off the appliance or
activating the key lock function, it will proceed increasing the minutes until
run out indication.
After reaching the ´00` of the timer, buzzer indicates the run out of time.
To stop the buzzer you have to confirm the ´run out` by touching any button.
Heater timer
Heater timers can be set only for activated heaters (heater level must be
set between 1-9)
First touch of , the minute minder is activated. After touching
second time, the timer is assigned to the activated heater. The proposed
assignment is indicated by the related Cooking Zone Indicator, who is
flashing.
Touching again after activating the fist heater timer, the control recommends
the next active heater assigned to the timer in the clockwise direction. The
assignment recommendation is indicated by the flashing Cooking Zone
Indicator.
Touching and
The running timer of the first set heater timer is indicated by the statically
lighting Cooking Zone Indicator.
Touching once again further timers can be assigned to other activated
heaters.
. The appearing ´00` shows that timer is active and
, the timer value for the heater can be set.
14
and are now linked
for the