Troubleshooting Guide; If The Antenna Connector Doesn't Match; When Other Panasonic Products Respond To This Remote Control; To Reset This Unit - Panasonic DIGA DMR-EZ27 Operating Instructions Manual

Troubleshooting Guide

If the Antenna Connector doesn't Match

Use one of the following connections to suit the antenna lead to the unit's RF IN terminal, and the 75 Ω coaxial
cable to the antenna terminals on your TV or other equipment. Refer to the other equipment's operating instructions
for more information.
Type This unit
from the antenna
A twin lead
When Other Panasonic Products
Respond to this Remote Control
Use this function to synchronize the codes for the
remote control and the main unit when there are other
Panasonic products close to your unit.
With the unit stopped
e, r to select "Setup", then q.
e, r to select "Remote Control
Code", then
e, r to select the code "Set Code1", "Set
Code2", or "Set Code3", then
While pressing and holding
press and hold the numbered
button
corresponding to the code set in
step 4 for more than 5 seconds to
set.
When the following indicator appears on the unit's display
– Change the code on the remote control to match the
code displayed for the main unit (➔ step 5).
66
Downloaded From Disc-Player.com Panasonic Manuals
RQT8851
(Flat) Twin lead
300 Ω cable
, , or
to complete.
Other equipment (television etc.)
300−75 Ω transformer
75−300 Ω transformer
75 Ω coaxial
To this unit's RF IN
cable
terminal
Tips
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].

To Reset this Unit

To reset the channel information and the
clock settings
On the main unit
Press and hold both buttons
for about 5 seconds.
To reset the ratings level settings
You can reset both parental rating (➔ 42) and
DVD-Video rating (➔ 38).
With the unit stopped
to set.
On the main unit
,
To restore the unit if it freezes
On the main unit
or
On the main unit
VHF or UHF
Television
to open the disc tray.
Press and hold
REC
both buttons for
about 5 seconds.
Press and hold for more
than 10 seconds.
– The unit is off.
Press and hold for
REC
more than 1 second
with a pointed object.