SKIP & SEARCH CD FUNCTIONS • INTEGRATED FULL SIZE HANDLE • 2 WAY POWER - AC/DC • VOLUME LIMITER SWITCH • REQUIRES 6 SIZE “C” BATTERIES PLEASE READ CAREFULLY BEFORE USE IB-CD10(SL)-WM-E-050705.pmd CD PLAYER MODEL CD-10 (not included) IB-CD10(SL)-WM-E-052605 5/26/2005, 9:23 AM...
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS 15. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2.
CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source. BATTERY DOOR (on the back of the set) • If the plug of the AC power cord does not match your ou tlet , do not for c e i t. Reverse it and try again.
PLAYING A CD OPEN button Connect the supplied AC power cord or batteries (refer to page 4). POWER PLAY/PAUSE NOTE: In order to avoid the music playing too loudly, we suggest you switch the volume limiter switch (in the battery compartment) to the ON position before playing the set.
REPEAT POWER PLAY/PROG. • Wh en C D p lay is paused, the PLAY/ PROG. lamp will be off, the track number will flash and no music will play. • To resume play, press the PLAY/PAUSE button again, the track number will stop flashing, the PLAY/PROG.
PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or programmed play mode (refer to page 8). REPEAT/PROGRAM button 1. Turn on the set, the POWER lamp will be steadily on. 2. Select the track by pressing 3.
You can make a program of up to 20 tracks in the order you want them to be played. RANDOM button REPEAT/PROGRAM button 1. Turn on the CD player by rotating the VOLUME/POWER OFF switch downward past click. Make sure the CD is stopped.
PRECAUTIONS On Safety • As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. • Should any solid object or liquid fall into...
TROUBLE SHOOTING Problem The power is not on. There is no sound. appears in the display “ ” even when a CD is in place. CD does not play. The sound drops out. No sound on battery power or weak sound. IB-CD10(SL)-WM-E-050705.pmd Remedy •...
During the initial 90 day period after original purchase, we will service or exchange, at no charge, the set that is returned to LENOXX ELECTRONICS CORP. After the initial 90 day period expires, and for a period of 12 months from original purchase, we will repair the unit covering any part(s) that need to be replaced at no charge, but will charge for the cost of labor, return postage paid by Lenoxx.