1. Manuals
  2. Brands
  3. Nexus Standard Manuals
  4. Metal Detector
  5. MP
  6. User manual

Nexus Standard MP User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Nexus Standard MP
Metal Detector
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Nexus Standard MP

Summary of Contents for Nexus Standard MP

  • Page 1 Nexus Standard MP Metal Detector User Manual...

  • Page 2: Table Of Contents

    10. Troubleshooting – page 14 General Description The Nexus Standard MP is an Analogue Induction Balance (IB) metal detector that operates in the very low frequency (VLF) range and it is designed for use on all Inland Sites, Tidal Salt Water Beaches.
  • Page 3 The standard coil supplied is the 10”DD and this is ideal for almost all searching operations. There are 3 different search coils currently available for the MP that can be used as accessory with the Nexus Standard MP. DD shape search coil range.

  • Page 4: Assembly & Preparation

    Nexus detectors. Performance values for all Nexus detectors will be identical. To obtain the best results with the Nexus Standard MP, as with all metal detectors, it is essential to understand the settings and operation of the detector.

  • Page 5: Controls

    Standard MP has an internal loudspeaker so headphones are not absolutely essential. For any headphones that have a volume control, ensure that this is set to MAXIMUM and use the Nexus Standard MP Volume knob on the control box to set the volume level.

  • Page 6: Ddm - Definite Discrimination Led Meter

    Ground Balance This knob is used to set the balance of the Nexus Standard MP to suit the soil conditions on any given site. The GB control on the MP is made with a 10 turn precision potentiometer fitted with a precision multi turn dial mechanism with locking function.

  • Page 7: Mode (Iron Rejection) Toggle Switch

    Standard for most types of normal and mineral soils and Heavy for magnetite, Iron or other types of ore. When the Nexus Standard MP is used on normal soil the Mineral Controls should be set at 0 (minimum) and the toggle switch at standard position.

  • Page 8: Full Manual Set Up

    Turn the Nexus Standard MP on. A tone will be heard and the DDM meter will flash. The tone will fade and the meter bar will settle after a couple of seconds.

  • Page 9: Search Method

    Finally, check again the threshold and volume settings for comfortable levels. The Nexus Standard MP is now set up for the particular site conditions and is ready for use. Search Method With the Nexus Standard MP set up and ready, the coil should be swung smoothly from side to side, a little above the ground surface.

  • Page 10: Pinpointing

    7”DD coil; any distance. However, by applying a Mineral Control up to a certain level the MP detector can effectively remove all residual ground noise and then the search coils can be carried at any distance above ground. In this case however there will be some loss of depth.

  • Page 11: Smaller Ones

    Keep doing so until all large targets and are removed and only the gold nuggets and smallest non-ferrous objects are left for detection. The Nexus Standard MP is now ready for hunting only those small targets. Note: Gold nuggets and all small targets are best detected at the standard ground balance setting in All Metal Mode.

  • Page 12: Metal Objects

    10, clockwise. Keep doing so until all small targets are giving small clicks in the audio responses and giving a blue response on the DDM meter. Now the Nexus Standard MP is ready for hunting larger objects only.

  • Page 13: Care Of Nexus Standard Mp

    Do not attempt to modify or repair the detector or allow any unauthorised repair centre to do so. Guarantee The Nexus Standard MP metal detector is guaranteed for a period of 24 months from date of purchase against all manufacturing defects. The Control Box is sealed and contains no user-serviceable parts Opening the Control Box will invalidate the Guarantee.

  • Page 14: Technical Specifications

    4. I only plug the search coil and detector does not work after that. Make sure that it is the correct search coil for your Nexus model. The search coils for Nexus Standard MP are not interchangeable with the lower Nexus models and vice versa.
  • Page 15 5. One or more control functions does not work. Make sure that you know how to use those control functions according to this User Manual. In case that any of the control functions do not cause any change of response in the detector functions then return the detector to your dealer for check and possible repair.

Table of Contents