Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Falcon 360-P
Summary of Contents for Falcon 360-P
- Page 1 Model(s) Falcon 360-P Firmware Version 1.0.01 Document Version Release Date 29 Sep 2014 © 2014 Apex Flight Operations – All Rights Reserved Uncontrolled in hardcopy - please check for the latest version of this document online at www.apexflightops.com...
-
Page 2: System Components
Version 1.2 Introduction Thank you for purchasing the Falcon 360-P – we have designed this system to provide efficient and cost-effective tracking for your aircraft, as well as provide you with a tool for reliable communication and data gathering during your flight operations. -
Page 3: Power Cable
Installation Power Cable The Power Cable provided is has a self-locking connection to the Falcon unit to ensure that it cannot become accidentally unplugged whilst in operation. The other side of the cable is terminated with an Auxiliary power plug – this should be inserted into the Auxiliary Power socket in the aircraft. - Page 4 Version 1.2 Positioning the Components The antenna component of the Falcon 360 Portable requires a view of the sky via the windshield of the aircraft, and should be positioned so that it is as clear of obstructions as possible. Depending on...
-
Page 5: Basic Operation
FALCON 360-P USER MANUAL Version 1.2 Basic Operation The Falcon requires very little direct interaction from the pilot or aircrew and has only three functions available via the Buttons on the front panel. Self-Diagnostics During startup, the Falcon will run a number of self-diagnostic tests, which will determine whether the unit is in good working order. - Page 6 Alert Button/Indicator The Falcon 360 features an Alert mode function which is triggered by pressing this indicator and holding the button for 2 seconds. The indicator is usually off, show normal operation mode – when triggered however, the indicator will flash red to show that the system is in Alert mode.
- Page 7 Internal battery in use – too low for transmission The button can be used to put the Falcon into a Quiet Mode – press and hold for 3 sec to enter this mode, and press any button to exit. In Quiet Mode, all indicator lights are extinguished, with the exception of the Bluetooth message waiting indication.
- Page 8 This Alert function can be triggered both from the Falcon itself, as well as via IndigoTrack Crew. To trigger the Alert on the Falcon, press and hold the Alert button for at least 2 seconds – to trigger the Alert via IndigoTrack Crew, please refer to the IndigoTrack Crew User Guide.
Need help?
Do you have a question about the 360-P and is the answer not in the manual?
Questions and answers