Summary of Contents for uBabycare UBC-001 series
-
Page 1: User Manual
SMART BABY MAT UBC-001 UBabyCare User Manual Intelligent Baby Movement Monitor USER MANUAL UBC-001 Series www.huijia-tech.com / www.ubabycare.com... -
Page 2: Warning
WARNING IMPORTANT INFORMATION ON USAGE CONDITION Read the instructions carefully before using your UBC-001 Series Smart Baby Mat (UBC). UBC has two devices that are Movement Receiver (receiver) and Wireless Movement Optics Mat (mat). Please put the mat on the bed or mattress, and don’t put it under the mattress. - Page 3 UBC-001 UBabyCare User Manual NO JUMPING/STAMPING NO SHARP HITS NO HEAVY WEIGHT NO BENDING OTHER NO HOLDING OF TH E NO IMMERSING IN THAN THE MID-POINT EDGE IN ONE HAND WATER...
- Page 4 UBC-001 UBabyCare User Manual • The UBC is NOT a medical device or a diagnostic device to prevent Sudden Infant Death Syndrome (SIDS) or ‘cot death’. Babies with a known predisposition to Please any breathing abnormality including apnea should be monitored by a doctor.
- Page 5 UBC-001 UBabyCare User Manual Receiver Status Indication Summary Sheet – Commonly occurring states Status indication Event Remarks The display will indicate ‘-‘ scrolling in a Calibration in progress circular fashion for a period of around 30 seconds The digit change dynamically...
-
Page 6: Table Of Contents
UBC-001 UBabyCare User Manual TABLE OF CONTENTS Warning Disposal instructions Getting Started Specification and Parts description Operation of the UBC Troubleshooting and FAQ Technical Support Limited Warranty DISPOSAL INSTRUCTIONS Do not dispose of this mat and the receiver with unsorted waste. Improper disposal may be harmful to the environment and human health. -
Page 7: Specification And Parts Description
UBC-001 UBabyCare User Manual SPECIFICATION AND PARTS DESCRIPTION UBC-001-A Receiver Turn ON or OFF Reset alarm (Press and hold the button) Toggle between functional modes MODE button Reset alarm (press and hold the button) Toggle between selection in the designated mode... - Page 8 UBC-001 UBabyCare User Manual UBC-001-B MAT ON/OFF switch Turn the mat ON or OFF Power LED indicator Mat operation status indication Battery compartment To insert 4 x AA dry cell batteries for the mat of mat Buzzer Local audio alarm outlet...
-
Page 9: Operation Of The Ubc
UBC-001 UBabyCare User Manual OPERATION OF THE UBC 2Kg~12Kg Baby is suitable (0~12 months) 1.Insertion of battery on the mat Flip the mat over to the bottom side. Open up the battery compartment cover. Insert the 4 AA batteries. 2.Insertion of battery on the Receiver... - Page 10 UBC-001 UBabyCare User Manual 5.Mat sensitivity adjustment To set mat sensitivity, press the MODE button until the mat sensitivity symbol is blinking. Adjust sensitivity by pressing the SELECT button. Set maximum sensitivity and adjust downwards to make sure there is no false alarm.
- Page 11 UBC-001 UBabyCare User Manual the mat, the display with show ‘--’. But No alarm will be activated BOTH the baby wake up and absence detection is disabled by default in factory. When disabled, the baby wake up or absence state will still be indicated visually on the Receiver display.
- Page 12 UBC-001 UBabyCare User Manual Functions A. Baby Movement Condition: No sleeping (After calibration process 8.Baby continue movement detect The display with show ‘M’ when movement is detected. 9.No body movement The display with show ‘00’ when no subtle body movement is detected for consecutive 15 seconds.
- Page 13 UBC-001 UBabyCare User Manual B. Baby Movement Condition: Sleeping 11. Baby movement count The baby body movement count per minute of the baby is monitored and displayed on the LCD. Typical body movement count range between 30 and 60. 12.No body movement The display with show ‘00’...
-
Page 14: Baby Absence
UBC-001 UBabyCare User Manual 14. Baby absence The display with show ‘--’ when the baby has rolled or carried out of mat. The alarm will be activated. Press and hold the MODE or SELECT button once to (normal button functions are de-activate it. - Page 15 UBC-001 UBabyCare User Manual C. Others 17.Out of range The open space distance limit between the Receiver and mat is up to 50 m. Indoor limits will be reduced significantly, subject to the layout of the building concrete structure. The antenna and...
- Page 16 UBC-001 UBabyCare User Manual 20. Low battery indication for Receiver The low battery indication for Receiver will blink simultaneously when battery for the Receiver is low. The audio alarm will be activated independently of the switch selection for the alarm type.
-
Page 17: Troubleshooting And Faq
UBC-001 UBabyCare User Manual Troubleshooting and FAQ Problem Possible cause Remedy False alarm The baby may have Switch off the Receiver • • excessive movement when when the parent/caretaker/ the caretaker/sibling is playing sibling is attending to the next to the baby or attending baby. -
Page 18: Technical Support
If you have questions about the use or features of the player please contact our Call Center at the following e-mail address:support@huijia-tech.com or contact UBabycare agent you buying it from. When you call or contact us for support, please include as much information possible from the packaging material. -
Page 19: Limited Warranty
UBC-001 UBabyCare User Manual LIMITED WARRANTY Your UBC is covered warranty for malfunction in the electronic parts only, for a period of 12 months from the date of the original purchase, when used in accordance with the instructions provided with the unit. The mat material is a disposable item which is subject to wear and tear, will not be covered in the warranty.