Reset The Device To Factory Default Settings - Manhattan 525695 User Manual

4.3.7 Reset the device to factory default settings
If you want to restore the factory default settings, you can do this two ways.
a) Factory reset using the reset button.
The easiest and quickest way is to press the reset
button while the wireless range extender is
powered on. Press the reset button for 10
seconds using a paper clip, then release. The
device will reboot and 30 seconds later the
device is set back to factory default values.
b) Factory reset using administration Web UI.
In the administrator interface, click "Save/Reload Settings."
Next, click "Load default," then confirm by clicking "OK" to perform the hardware reset.
When you see the message below, the wireless range extender is being reset to factory default values. After the restart is
completed, the device be accessible again.
- 21 -