Firewall/Nat Services; Advanced; Upnp - CastleNet SOHOSpeed User Manual

SOHOSpeed ADSL Ethernet USB Gateway User's Manual
Figure 12 (LAN IP address)
The apply button will temporarily save this connection. To make the change permanent you
need to click on Tools (at the top of the page) and select System Commands. At the system
commands page, click on Save All.

4.5.3 Firewall/NAT Services

You can enable or disable Firewall and NAT by going to the Home screen, click setup and
under LAN Setup, select Firewall/NAT Services. By unselecting the "Enable Firewall and NAT
Services" button the firewall and NAT services is disabled for all WAN connections.
The apply button will temporarily save this connection. To make the change permanent you
need to click on Tools (at the top of the page) and select System Commands. At the system
commands page, click on Save All.
4.6

Advanced

The gateway supports a host of advanced features. For basic Gateway functionality, the user
does not need to utilize these advanced features. The features help with routing, security, port
configuration, and plug and play capability.

4.6.1 UPnP

UPnP NAT and Firewall Traversal allow traffic to pass-thru the Gateway for applications using
the UPnP protocol. This feature requires one active DSL connection. In presence of multiple
DSL connections, select the one over which the incoming traffic will be present, for example
the default Internet connection.
To enable UPnP, you must first have a WAN connection configured. Once a WAN connection
is configured, from the Home screen, click Advanced and under Advanced, select UPnP. This
will bring up the screen shown in Figure 13. You must enable UPnP and then select which
connection will utilize UPnP.
20