Instruction Manual High-Definition Link for Audi BGT-Link-A3G Model Name BGT-Link-A3G Latest Firmware Date 2014 - 07 - 09 Manual Version Rev. 2.5 Language English...
Cautions BGT-Link-A3G - related • You should check the names and colors of each wires exactly, before you connect the wires. ex) CAN HIGH: White wires / CAN LOW: Blue wires • The ‘POWER / CAN Cable’ should always be connected last and be disconnected first.
Dimension Width: 142 mm Height: 22 mm Length: 91 mm ⓐ ⓑ ⓒ ⓓ ⓔ Exterior ⓐ DIP SWITCH ⓑ AV IN / OUT ⓒ TOUCH IN ⓓ MODE ⓔ POWER / CAN ⓕ HDMI IN ⓖ 5V USB POWER ⓗ...
Components Power / CAN Cable LVDS Cable LVDS PCB HDMI Cable AV IN / OUT Cable 5-pin Micro USB Cable Optional Parts Optional Parts (sold separately at the KAP) (purchased separately) TTA 24-Pin to HDMI Gender Touch-IN Cable Mode Switch iNAVI CUBE LCD Cable HDMI Cable HDMI extender...
CAN wires information(exceptions) < 2010, 2011 Audi A4 > < 2012~ Audi Q3 > Climate Controller – 20-Pin Connector Climate Controller – 16-pin Connector 19 20 12 13 POWER / CAN Cable POWER / CAN Cable HS CAN L HS CAN L Pin # 4 = HS CAN HIGH(Orange / Light Green) Pin # 12 = HS CAN LOW(Orange / Brown) HS CAN H...
HDMI Connection Diagram HDMI Device HDMI Device HDMI IN 5V USB NAVI IN UART I/F LVDS OUT HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER POWER HDMI HDMI HDMI HDMI (5V-1A Power output for HDMI Device) (5V-1A Power output for HDMI Device) (Male) (Female) (HDMI Extender)
Navigation Connection Diagram(Type A) Navigation Connection Diagram(Type B) Navigation(GPS) Box Navigation(GPS) Box HDMI IN 5V USB NAVI IN UART I/F LVDS OUT HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER POWER TOUCH IN HDMI HDMI Touch screen panel Touch screen panel HDMI Gender...
Compatibility Chart for Navigation(GPS) box models Dip S/W Installation Model Country Required Parts Type (Navigation) CUBE(Light) South Korea Type A - iNAVI Gender CUBE LCD Touch-IN HDMI Cable (TTA 24-pin OFF(↑): 1, 2, 3, 4 Cable(iNAVI) Cable to HDMI) (Male to Male) ↑...
LVDS Connection Diagram LVDS Connection HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER MMI 3G Plus & 3G Head Unit HDMI • 'Genuine(OEM) LVDS connector' should be connected to 'LVDS IN / OUT PCB'. • ‘Provided LVDS connector' should be connected to the head unit instead to the genuine connector.
Body Connector specifications MODE TOUCH-IN AV IN / OUT DIP SWITCH POWER / CAN 1 2 3 4 Length: 20 cm Length: 100 cm Length: 150 cm Length: 150 cm BATTERY POWER INPUT RV-CAM VIDEO INPUT GND(RV-CAM VIDEO) GND INPUT RV-CAM POWER OUT GND OUTPUT(RV-CAM) GND OUTPUT...
Car Compatibility Chart Production Car Models Specific Models Year 2010 - 2011 - 2010 - 2011 C6 (MMI 3G) 2011 - IW04A is used in combination with Audi MMI(Multi Media Interface) 2010 - system. 2010 - - MMI navigation (3G) - MMI navigation plus (3G) - MMI navigation plus (3G Plus) 2012 -...
Activation by original buttons of Audi MMI 3G Plus Controller MMI 3G Controller For MMI 3G Plus & MMI 3G Button Function Operation Remarks Changing Order: HDMI → NAVI → AV2 → OEM Press the button short. Modes If you visit car service center, you can lock System Press the button the all functions of IW04A.
Settings For MMI 3G Plus & MMI 3G Button Function Operation Enter into the MENU(SETUP) Press the button 5 seconds long. setting menu Back to previous BACK(RETURN) Press the button short. menu Select the menu Selection Press the button short. and setting values.
Settings 4. Rear view camera settings - Parking guide lines = Adjust position of parking guide lines and select the lines ‘ON or OFF’. - Parking distance control = Adjust position of parking distance control sensors to ‘LEFT or RIGHT’ and select the PDC ‘ON or OFF’. - Image display = Adjust the values of brightness and contrast Red-Green-Blue colors of Rear view camera display.
Settings 6. Automatic activation function(AV1) - Shift gear from reverse to drive - Shift gear from parking to drive * When you shift gear ‘from reverse to drive’ or ‘from parking to drive’, it just works automatically during the activation time you selected. 7.
- Factory default = Reset all setting values to factory default setting. 9. System information - Mode name: BGT-Link-A3G - Firmware date: 2014 - 07 - 09 (Latest firmware date) - = You can check the current firmware version date.
Settings 10. Information of Dip switch settings * You can check the current positions of dip switch settings. ex 1) ex 2) Actual DIP switch values. (→) Actual DIP switch values. (→) Appears on the setting menu. (↓) Appears on the setting menu. (↓)