Garment; Delay End; My Cycle - Samsung WF42H5200A Series User Manual

washing a load of laundry
Deactivating the Child Lock function
Press and hold both the soil level and spin buttons simultaneously for approximately 6 seconds.
• When you deactivate the Child Lock function, the door is unlocked and the "Child Lock " is turned off.
• The Child Lock function prevents children or the infirm from accidently operating the washer and
injuring themselves.
warning
• If a child enters the washing machine, the child may become trapped and suffocate.
• Once you have activated the Child Lock function, it continues working even if the power is turned
off.
• Opening the door by force can result in injury due to damage to the product.
To add laundry after you have activated the Child Lock function, you must first pause or deactivate the
Child Lock function.
cauTion
If you want to open the door of the washing machine when the Child Lock function is activated:
• Pause or deactivate the Child Lock function.
• Turn the washing machine off and then on again.

Garment+

You can add or take out laundry items even after the wash has started, as long as the "
is on. Pushing the sTarT/pausE button unlocks the door, unless the water is too hot or if there
is too much water in your washer. If you are able to unlock the door and wish to continue the
wash cycle, close the door, and then press the sTarT/pausE button.

Delay End

You can set the washing machine to start your wash automatically at a later time, choosing a delay time.
The hour displayed indicates the time at which the wash will be started.
1. Set your wash cycles.
2. Press the delay End button repeatedly until the delay time is set.
3. Press the sTarT/pausE button. The "Delay End
counting down until it reaches the set time.
4. To cancel a Delay End function, press the powEr button and then turn the washing machine on
again.

My Cycle

Lets you save a custom wash cycle (temperature, spin, soil level, etc.) and then recall and use it
with one button convenience.
To save a cycle and selected options as your My Cycle, follow these steps:
1. Select the cycle using the cycle selector dial.
2. After cycle selection, set each option.
See page 39 for available option settings with each cycle.
3. You can then store the selected cycle and options by pressing and holding the my cycle
button for longer than 3 seconds. The cycle and options you select will be displayed the next
time you choose the My Cycle function.
4. Press the My Cycle button to load and use the saved My Cycle options. The "My Cycle" light
will indicate activation. Also, the chosen course and option lights will flicker
You can change the "my cycle" settings by repeating the process above.
The washer displays the last settings used the next time you choose "my cycle".
If you press My Cycle and release it within 3 seconds, the previously saved cycles and
options appear. If you press and hold My Cycle for 3 second or longer, the currently set
cycles and options are saved and the LED blinks for 3 seconds.
" indicator will be lit, and the clock will begin
22_English
" light