Table 2.5: S3 Panel Type select
* Default setting
** will support in the future
2.19 TV-out interface (optional) (CN4, CN3)
The PCM-9373 board provides optional TV-out module PCM-232 via
CN4, CN3. This module output supports composite video and S-video
connectors. TV-out generators use both NTSC and PAL formats with 640
x 480 or 800 x 600 resolution.
To set up your video interface:
1.
Run the appropriate installation program located on the utility disk.
That's all there is to it.
2.20 Ethernet configuration
The PCM-9373 is equipped with a high performance 32-bit PCI-bus
Ethernet interface which is fully compliant with IEEE 802.3U 10/
100Mbps CSMA/CD standards. It is supported by all major network
operating systems.
The medium type can be configured via the RSET8139.EXE program
included on the utility disk. (See Chapter 3 for detailed information.)
2.20.1 100Base-T connector (CN17)
100Base-T connections are made via the on-board RJ-45 connector
2.20.2 Network boot
The Network Boot feature can be utilized by incorporating the Boot
ROM image files for the appropriate network operating system. The Boot
ROM BIOS files are included in the system BIOS, which is on the utility
CD disc.
PCM-9373 User's Manual
22