Playback - Philips CDC775/00 Service Manual

FUNCTIONAL OVERVIEW
Display
TRACK PEAK TOT REM
4 5
3 1
2
PROGRAM
SHUFFLE PAUSE REPEAT
– Lights up when the changer receives a command from
the remote control.
4 5
3 1 1 - 5 CD number indicator
2
– Lights up when you switch the changer on.
– Indicates the number of CDs in the CD compartment.
– Indicates what CD is being played (CD number
flashes).
PROGRAM
– Flashes when a program is being compiled.
– Lights up when a program is being played.
TRACK – Indicates:
– what track is being played;
– the number of tracks on a CD or in a program.
PEAK
– Flashes when the loudest passage (peak) on a CD or
in a program is being searched.
– Lights up when the loudest passage (peak) has been
found.
TRACK TIME
– Indicates the elapsed playing time of the track being
played.
REM(aining) TRACK TIME
– Indicates the remaining playing time of the track
being played.
8
Inserting the CDs
NOTE!
Use only audio CD; audio CD-R or audio CD-RW.
• Press POWER-ON/OFF to switch the changer on.
– The changer will now start CD detection to check how
many CDs there are in the CD compartment. The
turntable will rotate slowly until all positions (1 - 5)
in the CD compartment have been checked.
– The position which is being checked is always shown
on the display (dISC X).
– After CD detection the 1 - 5 CD number indicator will
show the number of CDs in the CD compartment.
• Open the CD compartment by pressing OPEN/CLOSE.
– OPEN lights up.
• Insert the CDs, printed side up; use the LOAD
button to rotate the turntable
in the CD compartment.
• Close the compartment by
pressing OPEN/CLOSE.
– CLOSE lights up. The
changer will start CD
detection again.
TOT(al) REM(aining) TIME
– Indicates the remaining playing time of a CD.
TRACK TIME TOT(al) TIME
– Indicates the total playing time of a CD.
SHUFFLE
1 DISC
– Lights up when the tracks are played in random order.
PAUSE
– Lights up when play is interrupted.
REPEAT 1
– Lights up when you repeat a track.
REPEAT DISC
– Lights up when you repeat a CD.
REPEAT
– Lights up when you repeat all CDs or a program from
them.
Display messages:
REAd – Lights up when a CD's contents list is being
scanned.
NO dISC –
Lights up when there are no CDs in the CD
compartment.
WRONG tRACK– Lights up when you select a non-
existent track number.
WRONG dISC– Lights up when you select a non-
existent CD number.
SELECt dISC– Lights up when you try to activate
a function for which you must first select a CD number.
INSERt dISC– Lights up when you give a play
command while the CD compartment is empty.
NOTE!
– CD detection may never be interrupted. If, during
detection, you press any button, then the changer
will stop detection and the display will give an
incorrect indication of the number of CDs in the CD
compartment.
– Always remove all CDs from the CD compartment if
you want to transport the changer.
Normal Playback (PLAY 2)
– The display shows the number of the current CD.
3
• Press PLAY 2 to start playback.
– The CD number indicator (1-5) always shows what CD
is being played (B X flashes).
– The track being played and its elapsed playing time
are shown under TRACK and TRACK TIME.
See 'CALLING UP INFORMATION ON THE DISPLAY' if
you wish to see other information on the display.
PREFERRED
POSITION
– Play will stop after all CDs have been played.
QUICK PLAY
• Press POWER-ON/OFF to switch the changer off.
LOAD
2-3
GO tO StOP – Lights up if you try to activate a
function for which you must first stop play.
Quick Play
• Use the PREFERRED POSITION
NOTE!
– You can also press PLAY 2 immediately after in-
1
2
– You can interrupt playback by pressing PAUSE ;;
– If you press PLAY 2 during play, the current track will
– You can stop playback by pressing STOP 9 .
– If you press OPEN/CLOSE during play, the CD
TRACK TRACK TIME
1
– Lights up when the player is put into the
EDIT mode.

PLAYBACK

in the CD compartment if you
wish to insert only one CD and
then start play by pressing the
QUICK PLAY button. Play will
LOAD
then start immediately with
the inserted CD.
serting the CDs; the compartment then closes
automatically and play starts from the first available
CD.
PAUSE then lights up. Press PLAY 2 or PAUSE ;; to
restart.
start again from the beginning.
compartment will open while play continues. The
three CDs outside the changer may now be changed
without playback being interrupted.
PCS 101 010
PREFERRED
POSITION
QUICK PLAY
9