Raid Status Messages - Symantec 5000 Series Installation Manual

Table 1-6
as follows:
CPU XX%
log XX%
Table 1-6
Field
CPU XX%
RAID XXX
log XX%
xxxxMb/s

RAID status messages

Symantec Gateway Security 5600 Series models with two hard drives installed run Redundant Array of
Inexpensive Disks software (RAID). The LCD displays messages about the RAID status of the
appliance's hard drives. RAID software maintains mirrored images on both hard drives to provide
uninterrupted operation in the event of disk failure on one of the hard drives. The appliance continues
to operate normally as long as one of the hard disks is working.
Table 1-7
Table 1-7
Message
OK
XX%
RDY
N/A
F 2
F 1
M 2
M 1
describes the system fields on the LCD screen. The system fields on your LCD screen appear
RAID: XXX
xxx Mb/s
LCD system fields
Description
Shows the percentage of CPU usage.
Displays status of the hard drives.
See "RAID status messages"
Shows the Log file size as compared with the free disk space.
Shows the throughput rate for the security gateway (Mbps).
When the security gateway is stopped, this field alternates between the throughput rate and the
LCD indicator (stopped).
describes the RAID messages displayed on the LCD.
RAID status messages
Description
Both hard drives are mirrored and working correctly.
Displays when mirroring is taking place. Shows the current percentage of completion of the
mirroring process.
A model 5640 is ready for addition of a second hard drive or a model 5660 is ready for a
replacement of a missing second hard drive.
RAID does not run on the appliance.
Applies only to the following:
Symantec Gateway Security model 5620
Upgraded Symantec Gateway Security 5400 series models
Upgraded Symantec Clientless VPN Gateway 4400 appliances.
One or both of the hard drives has failed:
2 is the top hard drive
1 is the bottom hard drive
If one of your hard drives has failed, see the SGMI Event logs for more information.
One of the hard drives is missing from a previously mirrored system:
2 is the top hard drive
1 is the bottom hard drive
on page 17.
Installing the appliance
Viewing system information on the LCD
17