Table of Contents
Advertisement
8.5 Security Setup
This feature provides some setup options which relate to the safe use of phone。
8.5.1 SIM1/SIM2 Security Setup
SIM card installed SIM card security settings corresponding。
8.5.1.1 SIM1 lock
It requires input the original PIN code to activate the function. After proper activating, it
requires input PIN code every time power on the phone. It allows up to 3 trials; the PUK code
(personal unlock code) will be required after 3 incorrect trials. Ask network service for support if
no PUK code supplied or got lost。
8.5.1.2 Fixed Dial
For outgoing calls limited (network service). After activated, the phone is limited to dial
numbers in Fixed Dial List. It‟s required to input PIN2 code before setting.
Note: For the first activation after power on the phone, if it‟s expected to keep the Fixed Dial
List status, please reset the phone after setting, since it‟s not necessary to re-enter the PIN2
code when edit the list before power off the phone.。
8.5.1.3 Barred Dial
For outgoing calls barred (network service). After activated, the phone will be barred to dial
the numbers in Fixed Dial List. It requires inputting PIN2 code before setting。
8.5.1.4 Change Password
For Pin Code、PIN2 code phone lock password changing
8.5.2 Phone lock
The function set for turn on/off phone lock, which requires password when power on/off the
phone. After activated, it requires for security code whenever a new SIM card inserted into the
phone.
8.5.3Auto Keypad Lock
To set the automatic keypad lock after a preset time delay when the phone is in the standby
mode and no function of the phone is used. 4 timers are optional: 5s, 15s, 30s, 1min. The function
is off in default.
8.5.4 Change password
You can change phone lock password here
8.5.5 Mobile tracker
You should input password to enter this menu first. The original password is 0000,and it
can be changed.
For prevent your private information from disclosing when the phone is lost, you can
erase your information like contactor/sms/mms from the phone by sending the following
messages to this phone.
#CLOSE#password, such as "#CLOSE#0000" to poweroff the phone.
#CPHB#password, such as "#CPHB#0000" to erase the contactors.
26
Advertisement
Table of Contents
