Setup; Pairing The Energy Monitor - LightwaveRF JSJS LW600 Operation Manual

4. Insert the 2 X AA batteries into the transmitter.
5. Attach the transmitter to the wall using the wall
mount kit provided, ensuring that the length of the
sensor cable will reach the location of the
transmitter.

SETUP:

The Energy monitor is designed to work in
conjunction with the LightwaveRF Connect Wi Link.
Please refer to the Wi -Link setup instructions for
guidance on how to install and setup the app or web
console.

PAIRING THE ENERGY MONITOR

Once you have set up the Wi -Link and installed the
Energy Monitor, you will need to pair the two
together.
1. Ensure that you are in RF range of the device when
setting up (generally within the home is acceptable
range).
2. On the Wi -Link Menu screen, press one of the
green buttons to scroll across until 'Energy Monitor'
is displayed. Press the green button next to the word
'install' .
3. Press the green LED button on the Energy Monitor.
The LED should ash green to indicate a successful
pairing. The monitor is now paired with the Wi -Link.