Opiz OP-D05-S User Manual page 7

·
Record
1.Select"Record" to check call history list.
2.If no SD card inside,it will display "No SD Card",back to main menu.
If SD card is inserted but no call history,it will display "No File",back to main menu.
If there are both SD card and call history,will entered to call history list,press
"Up/Down" button to select file. Press "OK" button into option list (Play ,Delete).
Play:Play calling history.
Delete:Delete all calling history.
Note:When you set auto-video,will auto-take video as have a calling.
When you set manual video,still have a time calling history,but no video record file.
The time calling record will be named begin with "B" and display "No video file" when
checking.
Video record will be named begin with "M". If the video record have been checked, the
name will change to be "m".
·
DV-photo
1.Select "DV-photo" entering to digital photo frame setting menu.
Will display "DV-photo: open"or "DV-photo: close" on first line.
2.Press"OK" button to switch digital photo frame on or off.
3.Press "Up/Down" button to choose second line (Interval Time Setup). Press "OK"
button to enter time setting of photo frame. Press "Up/Down" button to set (2s-
60seconds).
Note: It will display all photos stored on "DV-photo" file of SD card.
Example: If there is no photo on "DV-photo" file,will display "No Photo File".
The pictures should be put in "DV-photo" file of SD card in JPG only.
·
Code
The code has been set already, so please do not change it unless you have special
needs.
·
Tone
1.Select "tone" to enter tone setting menu
2.Select the music would like as ring tone.
3.Press "OK" button to confirm.
Note:The music should be put in "Ring" file of SD card in "WAV" format only.
-11-
·
ID-set
1.Select "ID-set" enter to monitor setting ID menu.
2.Press "Up /Down" button to change ID number(1-3).
3.Press "OK" button for confirmation.
Note:One outdoor unit can support 3 indoor monitor. To distinguish the monitors, you
need to set ID number for each monitor. ID number can not be repeated between
monitors.
·
Bright
1.Select "Bright" to enter screen brightness adjust menu.
2.Press "Up/Down" button to increase or reduce brightness (5 levels).
3.Press "OK" to confirm .
Note:Press "Up/Down" button to highest or lowest level will be in valid.
·
Color
1.Select "Color" enter to monitor outdoor camera. Outdoor image can be viewed if
communicate fine.
2.Press "Up/Down" button to adjust brightness (5 levels).
3.Press "Back" button to exit or will be back to standby status in 60s automatically.
·
Standby
1.Select "Standby" to enter to setting of standby time menu.
2.Press"Up/Down" button to increase or reduce standby time (10s-60s),
3.Press "OK" button to confirm and exit to standby time setting menu.
·
Volume
1.Select "Volume" to enter to volume setting menu.
2.Press"Up/Down" button to increase or reduce volume (8 levels).
3.Press "OK" button to confirm and back to volume setting.
Note:Press"Up/Down" button to highest or lowest level will be invalid.
-12-