Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Mopar Manuals
  4. Car Navigation system
  5. RHR
  6. User manual

Mopar RHR User Manual

Rhr navigation kit
Hide thumbs

Advertisement

Quick Links

Download this manual
Click on the desired vehicle to take you directly to the vehicle specific
instructions.
2011 - RAM
2011 - WRANGLER
2011 - AVENGER
2011 - SEBRING
2011 - LIBERTY
2011 - NITRO
2011 - CHALLENGER
2011 - MINIVAN
2011 - GRAND CHEROKEE/DURANGO
Dec 31, 2010
RHR NAVIGATION KIT
K6861192

Advertisement

loading
Need help?

Need help?

Do you have a question about the RHR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mopar RHR

Summary of Contents for Mopar RHR

  • Page 1 RHR NAVIGATION KIT Click on the desired vehicle to take you directly to the vehicle specific instructions. 2011 - RAM 2011 - WRANGLER 2011 - AVENGER 2011 - SEBRING 2011 - LIBERTY 2011 - NITRO 2011 - CHALLENGER 2011 - MINIVAN...
  • Page 2 RHR NAVIGATION RADIO KIT CALL OUT DESCRIPTION QUANTITY RHR Radio (AM/FM/CD/DVD/HDD/MP3/ NAV) RHR Owner Manual DVD TOOLS REQUIRED Phillips Head Screw Driver Fiber Trim Stick Scan Tool T25 Torx Screw Driver Dec 31, 2010 K6861192...
  • Page 3 1. Disconnect and isolate the negative battery cable. 2. Using a trim stick C­4755 or equivalent, disengage the retaine clips that secure the power outlet trim bezel (1) to the center bezel (2). 3. Remove the upper center bezel bin tray liner. 4.
  • Page 4 5. Remove the lower center bezel bin tray liner from the center console. 6. Remove the retainers from the center console bin (1). 7. Remove the retainer (1) from above the power outlet. Dec 31, 2010 K6861192...
  • Page 5 8. Using a trim stick C­4755 or equivalent, disengage the retainer clips that secure the trim ring to the floor con­ sole (1). 9. Using a trim stick C­4755 or equivalent, disengage the retainer clips that secure the shifter bezel to the floor console (1).
  • Page 6 10. Using a trim stick C­4755 or equivalent, disengage the retainer clips that secure the instrument panel center bezel to the instrument panel. 11. Disconnect the wire harness connectors (1) and re­ move the center bezel from the vehicle. 12. Remove the radio mounting fasteners. CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connec­...
  • Page 7 22. Position the instrument panel center bezel near the instrument panel and connect the wire harness con­ nectors (1). 23. Install the instrument panel center bezel onto the in­ strument panel and fully engage the retainer clips. 24. Install the shifter bezel to the floor console (1) and fully engage the retainer clips.
  • Page 8 25. Install the shifter bezel trim ring (1) and fully engage the retainer clips. 26. Install the retainers from the center console bin (1). 27. Install the lower center bezel tray liner. Dec 31, 2010 K6861192...
  • Page 9 28. Install the retainer (1) from above the power outlet. 29. Install the retainers to the bin above the radio (1). 30. Install the upper bin tray liner. Dec 31, 2010 K6861192...
  • Page 10 VIN, four digit pin number obtained from the dealership parts department and add sales code(s) noted below as a "Dealer Installed Option". RHR (AM/FM/DVD/HDD with SDARS) 4. Confirm that the new sales code has been successfully added to the VIN.
  • Page 11 RHR NAVIGATION RADIO KIT WRANGLER CALL OUT DESCRIPTION QUANTITY RHR Radio (AM/FM/CD/DVD/HDD/MP3/ NAV) RHR Owner Manual DVD TOOLS REQUIRED Phillips Head Screw Driver Fiber Trim Stick Scan Tool T25 Torx Screw Driver Dec 30, 2010 K6861192...

  • Page 12: Procedure Steps

    PROCEDURE STEPS: 1. Disconnect and isolate the negative battery cable. 2. If equipped with power windows, using a fiber trim stick, gently pry the switch assembly (2) away from the trim panel (1), disconnect the electrical connector and remove the switch. 3.
  • Page 13 9. Using a fiber trim stick, disengage the two retaining clips (1) that secure the top of the steering column opening cover (2) to the instrument panel. 10. Disengage the two lower retaining tabs and remove the steering column opening cover. 11.
  • Page 14 15. Release the remaining 13 retaining clips (1) and re­ move the trim panel (2). CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connec­ tor could damage the cable or radio. 16. Remove the radio mounting screws. 17.
  • Page 15 28. Install the two screws (3) that secure the trim panel to the instrument panel, located at the steering column opening. 29. Install the screw (2) through the center opening of the trim panel. 30. Install the screw and the storage bin mat at the center of the instrument panel.
  • Page 16 VIN, four digit pin number obtained from the dealership parts department and add sales code(s) noted below as a "Dealer Installed Option". RHR (AM/FM/DVD/HDD with SDARS) 4. Confirm that the new sales code has been successfully added to the VIN.
  • Page 17 RHR NAVIGATION RADIO KIT AVENGER CALL OUT DESCRIPTION QUANTITY RHR Radio (AM/FM/CD/DVD/HDD/MP3/ NAV) RHR Owner Manual DVD TOOLS REQUIRED Phillips Head Screw Driver Fiber Trim Stick Scan Tool T25 Torx Screw Driver PROCEDURE STEPS: Dec 31, 2010 K6861192...
  • Page 18 1. Disconnect and isolate the negative battery cable. 2. Using trim stick C­4755 or equivalent, pull upward to disengage the retaining clips and remove the center bezel hood (1). 3. Using trim stick C­4755 or equivalent, disengage the center trim bezel (1) retaining clips. 4.
  • Page 19 CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio. 8. Disconnect the AM/FM antenna (2) and electrical con­ nectors (1). 9. If equipped, disconnect the navigation antenna (3). 10.
  • Page 20 VIN, four digit pin number obtained from the dealership parts department and add sales code(s) noted below as a "Dealer Installed Option". RHR (AM/FM/DVD/HDD with SDARS) 4. Confirm that the new sales code has been successfully added to the VIN.
  • Page 21 RHR NAVIGATION RADIO KIT SEBRING CALL OUT DESCRIPTION QUANTITY RHR Radio (AM/FM/CD/DVD/HDD/MP3/ NAV) RHR Owner Manual DVD TOOLS REQUIRED Phillips Head Screw Driver Fiber Trim Stick Scan Tool T25 Torx Screw Driver PROCEDURE STEPS: Dec 31, 2010 K6861192...
  • Page 22 1. Disconnect and isolate the negative battery cable. 2. Using trim stick C­4755 or equivalent, disengage the center trim bezel (1) retaining clips. 3. Reach behind the bezel and disconnect all electrical connections. 4. Remove the center bezel from the instrument panel. 5.
  • Page 23 VIN, four digit pin number obtained from the dealership parts department and add sales code(s) noted below as a "Dealer Installed Option". RHR (AM/FM/DVD/HDD with SDARS) 4. Confirm that the new sales code has been successfully added to the VIN.
  • Page 24 • Note On­Screen instructions and select the "Close" button Dec 31, 2010 K6861192...
  • Page 25 RHR NAVIGATION RADIO KIT LIBERTY CALL OUT DESCRIPTION QUANTITY RHR Radio (AM/FM/CD/DVD/HDD/MP3/ NAV) RHR Owner Manual DVD TOOLS REQUIRED Phillips Head Screw Driver Fiber Trim Stick Scan Tool T25 Torx Screw Driver PROCEDURE STEPS: Dec 31, 2010 K6861192...
  • Page 26 1. Disconnect and isolate the negative battery cable. 2. Using a trim stick (2) C­4755 or equivalent, work around the perimeter of the bezel (3) and across the middle releasing the retaining clips and separate the bezel from the instrument panel (1). 3.
  • Page 27 CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connec­ tor could damage the cable or radio. 7. Remove the radio mounting fasteners. 8. Pull the radio out far enough to access the back of the radio.
  • Page 28 VIN, four digit pin number obtained from the dealership parts department and add sales code(s) noted below as a "Dealer Installed Option". RHR (AM/FM/DVD/HDD with SDARS) 4. Confirm that the new sales code has been successfully added to the VIN.
  • Page 29 RHR NAVIGATION RADIO KIT NITRO CALL OUT DESCRIPTION QUANTITY RHR Radio (AM/FM/CD/DVD/HDD/MP3/ NAV) RHR Owner Manual DVD TOOLS REQUIRED Phillips Head Screw Driver Fiber Trim Stick Scan Tool T25 Torx Screw Driver PROCEDURE STEPS: Dec 31, 2010 K6861192 Rev. 1...
  • Page 30 1. Disconnect and isolate the battery negative cable. 2. Set the park brake and move the transmission gear selector into the most rearward position. 3. Remove the storage bin mat (1). 4. Remove the screws (1). Dec 31, 2010 K6861192 Rev. 1...
  • Page 31 5. Using a trim stick C­4755 or equivalent, release the top most retaining clips (1) CAUTION: To avoid damage to the bezel do not pull on the bezel to release the retaining clips (2). 6. Using a trim stick C­4755 or equivalent, carefully re­ lease the retaining clips (2).
  • Page 32 10. Remove the radio mounting fasteners. 11. Pull the radio out far enough to access the back of the radio. 12. Disconnect the AM/FM antenna (2) and electrical con­ nectors (1). 13. If equipped, disconnect the navigation antenna (3). 14. If equipped, disconnect the USB connectors (4). 15.
  • Page 33 23. Position the bezel up over the radio and seat the re­ taining clips (1 ­ 4) fully. 24. Position the storage bin (1) into place and seat fully. Dec 31, 2010 K6861192 Rev. 1...
  • Page 34 25. Install the storage bin screws (1). 26. Install the storage bin mat (1) and seat fully. 27. Connect the negative battery cable. UPDATE VEHICLE CONFIGURATION NOTE: The wiTECH software level must be at the latest release to perform this procedure. 1.
  • Page 35 VIN, four digit pin number obtained from the dealership parts department and add sales code(s) noted below as a "Dealer Installed Option". RHR (AM/FM/DVD/HDD with SDARS) 4. Confirm that the new sales code has been successfully added to the VIN.
  • Page 36 RHR NAVIGATION RADIO KIT CHALLENGER CALL OUT DESCRIPTION QUANTITY RHR Radio (AM/FM/CD/DVD/HDD/MP3/ NAV) RHR Owner Manual DVD TOOLS REQUIRED Phillips Head Screw Driver Fiber Trim Stick Scan Tool Dec 31, 2010 K6861192...
  • Page 37 1. Disconnect and isolate the battery negative cable. 2. Using trim stick C­4755 or equivalent, remove the cen­ ter bezel (2) from the instrument panel (1) by releasing the snap retainers from the instrument panel. 3. Disconnect the electrical connectors. 4.
  • Page 38 VIN, four digit pin number obtained from the dealership parts department and add sales code(s) noted below as a "Dealer Installed Option". RHR (AM/FM/DVD/HDD with SDARS) 4. Confirm that the new sales code has been successfully added to the VIN.
  • Page 39 • Note On­Screen instructions and select the "Close" button Dec 31, 2010 K6861192...
  • Page 40 RHR NAVIGATION RADIO KIT MINIVAN CALL OUT DESCRIPTION QUANTITY RHR Radio (AM/FM/CD/DVD/HDD/MP3/ NAV) RHR Owner Manual DVD TOOLS REQUIRED Phillips Head Screw Driver Fiber Trim Stick Scan Tool T25 Torx Screw Driver PROCEDURE STEPS: Dec 31, 2010 K6861192...
  • Page 41 1. Disconnect and isolate the negative battery cable. 2. Using Trim Stick C­4755 or equivalent, work around the perimeter of the bezel (1) releasing the retaining clips and separate the bezel from the instrument panel. 3. Remove the radio (2) mounting fasteners (1). CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.
  • Page 42 4. Pull the radio out far enough to access the back of the radio. 5. Disconnect the AM/FM antenna (2) and electrical con­ nectors (1). 6. If equipped, disconnect the navigation antenna (3). 7. If equipped, disconnect the USB connectors (4). 8.
  • Page 43 VIN, four digit pin number obtained from the dealership parts department and add sales code(s) noted below as a "Dealer Installed Option". RHR (AM/FM/DVD/HDD with SDARS) 4. Confirm that the new sales code has been successfully added to the VIN.
  • Page 44 RHR NAVIGATION RADIO KIT GRAND CHEROKEE/DURANGO CALL OUT DESCRIPTION QUANTITY RHR Radio (AM/FM/CD/DVD/HDD/MP3/ NAV) RHR Owner Manual DVD TOOLS REQUIRED Phillips Head Screw Driver Fiber Trim Stick Scan Tool T25 Torx Screw Driver PROCEDURE STEPS: Dec 31, 2010 K6861192...
  • Page 45 1. Disconnect and isolate the battery negative cable. 2. Using a trim stick C­4755 or equivalent, work around the perimeter of the bezel, and across the middle re­ leasing the retaining clips (1) and separate the bezel from the instrument panel. 3.
  • Page 46 VIN, four digit pin number obtained from the dealership parts department and add sales code(s) noted below as a "Dealer Installed Option". RHR (AM/FM/DVD/HDD with SDARS) 4. Confirm that the new sales code has been successfully added to the VIN.
  • Page 47 • Note On­Screen instructions and select the "Close" button Dec 31, 2010 K6861192...