MusicStream Tablet User Guide
Version 1.4 | August 2012
This user guide has been created to help you get up and running with your new MusicStream tablet. Everything you need to
get the music playing is in the box apart from an amplifier and speakers. The MusicStream player application is pre-installed on
the tablet, so all you need to do is connect the wires, switch on the tablet and press play. Follow the instructions below and if
you require any assistance contact Customer Support on
NOTE: Some amplifier and HiFi's do not have a phono AUX IN, they instead rely on a 3.5mm jack external input or only have
an iPod® dock. We have adaptors and cables to solve all these issues. please contact Customer Support.
1
UNPACK THE BOX
2
CONNECT TO POWER
Audio OUT
Reset
HDMI
USB (mini)
1.
Power (5V DC)
+44 (0) 844 8010 710
5V, 2A DC Power cable to UK three pin plug
Phono to 3.5mm jack (1.5m)
-
+
or e-mail support@musicstreamplayer.com.
-
+
BACK
HOME
MENU
1.
AUDIO OUT
Reset
HDMI
USB (mini)
5V DC Power
Inside the box you will find:
1x MusicStream 7" tablet
1x 5V, 2A DC power cable
(UK 3-pin version).
1x 3.5mm jack to phono audio
You will need:
MusicStream tablet
5V, 2A DC Power cable
1.
Insert the 5V DC power cable
into the Power port port on the
tablet. It is marked in the tablet
with DC-5V.
Plug the transformer plug into a
mains power-point and switch
on.
cable.
PAGE 1
Need help?
Do you have a question about the 7” and is the answer not in the manual?
Questions and answers