1.3megapixel hd network mini ir-bullet camera (14 pages)
Summary of Contents for ABL AIP-2MBV
Page 1
HD IR Waterproof Fixed Network Camera (With Integrated Bracket)Quick Start Guide Version 3.3.3...
Page 2
Welcome Thank you for purchasing our network camera! This quick start guide is designed to be a reference tool for your system. Please keep this start guide well for future reference. Please open the accessory bag to check the items one by one in accordance with the list below. Contact your local retailer ASAP if something is missing or damaged in the bag.
Page 3
Thunder-proof device is recommended to be adopted to better prevent thunder. The grounding studs of the product are recommended to be grounded to further enhance the reliability of the camera. 6. Daily Maintenance Please shut down the device and then unplug the power cable before you begin daily maintenance work.
1 Framework 1.1 Multiple-function Combination Cable You can refer to the following figure for multiple-function combination cable information. See Figure 1-1 Figure 1-1 Multiple-function combination cable Please refer to the following sheet for detailed information. Port Name Function Connection Note DC 12V/AC Power input...
Port Name Name Note ALARM_COM Alarm output public port. Alarm output port. It is to output the alarm signal to the alarm device. ALARM_NO NO: normal open alarm output port. It works with the ALARM_COM port. I/O Port Alarm input port 1. It is to receive the on-off signal ALARM_IN1 from the external alarm source.
Figure 1-3 Dimension illustration 2 Figure 1-4 Dimension illustration 3 1.3 Bidirectional Talk 1.3.1 Device-end to PC-end Device Connection Please connect the speaker or the MIC to the audio input port of the device. Then connect the earphone to the audio output port of the PC. Login the Web and then click the Audio button to enable the bidirectional talk function.
Login the Web and then click the Audio button to enable the bidirectional talk function. You can see the button becomes orange after you enabled the audio talk function. Click Audio button again to stop the bidirectional talk function. Please note the listening operation is null during the bidirectional talk process. Listening Operation At the PC-end, speak via the speaker or the pickup, and then you can get the audio from the earphone or sound box at the device-end.
Page 9
Figure 1-6 Alarm input Please refer to the following figure for alarm output information. See Figure 1-7. Port ALARM_COM and Port ALARM_NO composes an on-off button to provide the alarm output. If the type is NO, this button is normal open. The button becomes on when there is an alarm output.
2 Installation Please note all frame and dimension illustrations provided in this chapter are for reference only, and actual product may vary. 2.1 Device Installation Please refer to Figure 2-1 or Figure 2-2 for installation information according to the actual product. Please follow the steps listed below to install the device.
Figure 2-2 Device installation 2 2.2 Micro SD Card Installation Use the inner hex wrench from the installation accessories bag to remove the four inner hex screws from the rear cover. Please refer to Figure 2-3 or Figure 2-4 to find the Micro SD card slot position according to the actual product.
2.3 Lens Adjustment Turn counter clockwise to remove the lens cover, now you can see the iris front and rear control rod. The front control rod is to focus and the rear control rod is to zoom. See Figure 2-5. Please turn clockwise to fix the lens cover back firmly.
Figure 2-7 Bracket adjustment 2 2.5 OSD Buttons Please refer to the following contents for detailed information. See Figure 2-8 and Figure 2-9. Top button: Focus zoom in Bottom button: Focus zoon out. Left button: Far. Right button: Near.
3 Quick Configuration Tool 3.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 3.2 Operation Double click the “ConfigTools.exe”...
Page 18
In the configuration tool search interface (Figure 3-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface. See Figure 3-3. In Figure 3-3, you can view device IP address, user name, password and port.
4 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 4.1 Network Connection Please follow the steps listed below for network connection. ...
Page 20
Figure 4- 2 Web login If it is your first time to log in, system pops up warning information to ask you whether install web plug-in or not after you logged in for one minute. For detailed plug-in installation, please refer to the Web Operation Manual included in the resource CD.
Page 21
Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction.
Appendix Toxic or Hazardous Materials or Elements Component Name Toxic or Hazardous Materials or Elements Cr VI PBDE ○ ○ ○ ○ ○ ○ Circuit Board Component ○ ○ ○ ○ ○ ○ Device Construction Material ○ ○ ○ ○ ○...
Need help?
Do you have a question about the AIP-2MBV and is the answer not in the manual?
Questions and answers