ROHS SR-2810 User Manual

SR-2810 programmable RGB remote controller
4 zones
SR-2810 remote controller is touching color wheel remote which has
4 different zones that can be controlled separately or simultaneously
in any combination, with multiple receivers allowed in each zone.
The remote can store color sequences into 4 zones. Enable to
choose to fade or step through color wheel.
2.Performance Parameter
(1) Sender: (SR-2810)
Operation voltage: 4.5VDC
Operation frequency: 434MHZ / 868MHZ
Battery: 3pcs 7 AAA battery.
(2) Receiver: (SR-1006TA/ SR-1006FA/ SR-1006EA/ SR-1006FA3/
SR-1006FA7)
Input voltage: 12-36VDC
Output voltage: 12-36VDC
SR-1006TA: 3 channels x 3A, 3 channels x (36-108W)
SR-1006FA: 3 channels x 5A, 3 channels x (60-180W)
SR-1006EA: 3 channels x 8A, 3 channels x (96-288W)
SR-1006FA3: 3 channels x 350mA, 3 channels x (4.2-12.6W)
SR-1006FA7: 3 channels x 700mA, 3 channels x (8.4-25.2W).
3.Brief introduction of buttons
3.1 Remote
Color wheel
Run program of zone(s)
Decrease brightness
Primary color
Speed up
3.2 Receiver
12-36VDC
input
1-4 zones, store 4 programs
Short press: choose zone
Long press: on/off of zone(s)
Indicator
Programmable button
ON/OFF button
Increase brightness
Saturation color temperature
change to white
Speed down
Learning button
R/G/B 3 channels
output