Table of Contents
Advertisement
S e t u p y o u r p h o n e
2. Plug the headset connector into the 2.5 mm
headset jack on the side of your device (2).
3. Position the headset on your ear.
With the headset connected, you can make,
answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the send key to place a call.
See "Phone at a glance," p. 7.
• Press the end key to end a call.
■ Make a call
To make a call, make sure the phone is turned on. From the standby mode, enter
the number you want to call, and press the send key. See "Contacts," p. 35, to use
the contacts menu and to enter contact numbers. This is a network feature.
Use the keypad
Enter the phone number (including the area code if necessary), and press the
send key. To delete a character to the left of the cursor, press the clear (CLR) key.
Press the end key to end the call. This is a network feature.
Use recently dialed numbers
In the standby mode, press the send key once to display the latest numbers
dialed, received, or missed. Press the send key again to dial the last number you
dialed, or scroll to select the number (or name) you wish to redial, and press the
send key. This is a network feature.
Speaker phone
To use the speaker phone when in a call, press and hold the voice recognition key
located on the left side of the phone. The
phone off, press and hold the voice recognition key again. This is a network feature.
Voice recognition
You can use voice commands to make calls, look up contact information, address
messages, open applications, and check the phone status. This is a network feature.
Note: Using voice recognition may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice commands
in all circumstances.
14
icon is displayed. To turn the speaker
Advertisement
Table of Contents
