Lenovo ThinkPad T61p Hardware Maintenance Manual page 101

Table 29. Removal steps of base cover (continued)
Step Screw (quantity)
M2 × 5 mm, flat-head, nylon-coated (2)
4
M2 × 3 mm, small-head, nylon-coated (1)
5
For discrete graphics models: When you are servicing, make sure that the
thermal rubber for FET is firmly attached on the system board as shown in a .
When replacing the rubber, you need to peel the thin film off from the bottom,
and attach it to the system board.
a
4
4
5
ThinkPad T61 and T61p (14.1-inch)
Color Torque
Black 0.167 Nm
(1.7 kgfcm)
Silver 0.167 Nm
(1.7 kgfcm)
93