FRONT PANEL
To switch ON the receiver or
To access the programming menus.
to switch standby.
To display channel list in viewing mode
or to enter the programming
parameters.
REAR PANEL
100~240V Power Input (Optional function)
Connect Video to a TV using RCA jack, Connect Audio L/R to TV or Audio device
To change services up/down
To move the cursor (highlighted) or to change
the volume.
To switch ON the receiver or
to switch standby.
Connect to TV and VCR using a SCART cable
Optic jack (Optional function)
RF Modulator (Optional function)
To change services up/down
To move the cursor
(highlighted) or to change
the volume.
LNB IN : Connect to
Satellite Antenna
Loopthrough
Serial : Connect to a PC for
S/W upgrade
5
GENERAL INFORMATION
To access the programming menus.
To display channel list in viewing
mode or to enter the programming
parameters.