Samsung CLP-36x Series User Manual page 102

Installing driver over the network
Command- line Definition
/f"<log filename>" or Specifies log filename.
/F"<log filename>" The default log file is
created in the system
temp folder if not
specified.
/h, /H or /? Shows Command-line
Usage.
7
Macintosh
1 Make sure that the machine is connected to your network and powered
on.
2 Insert the supplied software CD into your CD-ROM drive.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
3
Double-click the MAC_Installer folder > Installer OS X icon.
4
Click Continue.
5
6 Read the license agreement and click Continue.
7 Click Agree to agree to the license agreement.
Description
It will create a log file to a
specified folder.
8 When the message which warns that all applications will close on your
computer appears, click Continue.
9 Click Continue on the User Options Pane.
If you have not set the IP address yet, click Set IP address and refer to "IPv4
configuration using SetIP (Macintosh)" on page 97. If you want to set the
wireless setting, refer to "Setup using Macintosh" on page 118.
Click Install. All components necessary for machine operations will be
10
installed.
If you click Customize, you can choose individual components to install.
11 Enter the password and click OK.
12 Installing software requires you to restart your computer. Click Continue
Installation.
13 After the installation is finished, click Close.
2. Using a network-connected machine
102