Lenovo ThinkCentre M79 User Manual page 95

Replacing the solid-state drive in the hard disk drive bay
To replace the storage converter with the solid-state drive installed in it, you might follow the steps of
replacing the hard disk drive. See "Replacing the hard disk drive" on page 80.
To replace the solid-state drive in the storage converter, do the following:
1. Remove the four screws that secure the solid-state drive to the storage converter. Then, remove the
drive from the converter as shown.
Figure 25. Removing the solid-state drive from the storage converter
2. Take the new solid-state drive out of the static-protective package.
.
Chapter 9 Installing or replacing hardware
83