Table of Contents
Advertisement
Galaxy GHDX4 RAID iSCSI-SAS/SATA Installation+Hardware Reference Manual
Components to be Installed
You must install the following components:
Rack/Cabinet Installation
The subsystem is designed to fit into a variety of 19-inch rack
cabinets or racks. Make sure you have an appropriate site location
and cables prepared with adequate lengths to connect to mains and
other devices.
The subsystem should be installed in the rack or cabinet before the
hard drives and the drive trays are installed. If the drive trays with the
associated hard drives are installed, the subsystem will be too heavy
to mount into a rack or cabinet. When installing the subsystem into a
rack or cabinet it is advisable that two (2) people assist in the
mounting process.
Package Contents
The rackmount rail kits includes the following components. Be sure to
confirm that you have received each item listed below:
Item
01
02
03
04
05
06
07
08
Rackmount rails
Drive trays [with drives pre-installed] into RAID chassis
BBU module (if ordered as an optional component)
Description
Mounting bracket assembly, L-shape, left-side
Mounting bracket assembly, L-shape, right-side
Inner glide
Flange filler plate (fixed behind chassis ears)
Cross recess truss head screws M5 x 9.0mm
#6-32 x10mm flathead screws
#6-32 L6 flathead screws
M5 cage nuts
31
Quantity
1
1
2
2
8
4
6
4
Advertisement
Table of Contents
