Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Lloyds Pharmacy GY6000
- Page 1 Digital Pedometer User Manual Model - GY6000...
- Page 2 TABLE OF CONTENTS General Features LCD display Functions and mode descriptions P.3-10 Technical specification P.11 Battery Replacement P.12 Caution and Maintenance P.12...
- Page 3 General Features 4 display modes Key description - There are 4 different modes of display :- (i) “Step count & kcal” mode, There are 4 buttons on the unit:- (ii) “Step & Target step reminder” mode , [MODE] button (iii) “Distance & Stopwatch” mode, [SET] button (iv) “Alarm &...
- Page 4 LCD Display Function and Mode Descriptions A) Default Settings • When the unit is turned on, the default display screen is the STEP/KCAL screen which are both at 0. • The default STEP/TARGET screen is set at 0 steps and 1000 target reminder •...
- Page 5 Function and Mode Descriptions B) “Step count & kcal” display mode - The unit will show the step count in the first line of display and calories (kcal) burned in the second line. - “Step/kcal” icon will turn on. - Press and hold [Set] key to set weight and stride length. Weight and Stride Setting: - Weight mode will flash for adjustment.
- Page 6 Function and Mode Descriptions Weight Conversion Chart. 1 Stone = 14lbs 1 Stone = 6.350Kg STONES POUNDS KILOGRAMS STONES POUNDS KILOGRAMS Auto- return: If no key is pressed for 90sec, the unit will auto-return to the Step & kcal display. To reset the step count, kcal count and distance travelled to 0, press and hold the [UP] button for 2 seconds.
- Page 7 Function and Mode Descriptions C) “Step & Target step reminder” display mode - The unit will show the step count in the first line of display and step reminder in the second line. To set the Target Step Reminder. - Press [SET] button to enter the Target step reminder setting mode.
- Page 8 Function and Mode Descriptions Changing the sensitivity of the Digital Pedometer – Open the back of the unit and slide the sensitivity switch to increase/decrease the sensitivity of the pedometer. (refer to 'General Features' on page 2) - Press [MODE] button to go to distance & Stop watch display mode. D) “Distance &...
- Page 9 Function and Mode Descriptions - Using the Stopwatch. - Press [SET] to start the stopwatch. The “ ” icon will flash on the LCD screen. - Press [SET] again to stop the stopwatch. The “Stop” icon will be displayed. - Press [UP] to reset the stopwatch back to zero. - The stopwatch counting range is from 00’00”00 to 99’59”99.
- Page 10 Function and Mode Descriptions Alarm setting mode: - Press and Hold [SET] key for approximately 3 seconds to enter the Set Alarm Mode. e.g. Alarm in 12 hour format: A: represent AM P: represent PM Alarm Time Setting: - The hour digit will flash for adjustment. - Press [UP] or [DOWN] to advance/decrease the hour digits.
- Page 11 Function and Mode Descriptions The Alarm will sound for 20 seconds or until the user presses [MODE], [SET], [UP] or [DOWN]. - Auto-return: If no key is pressed for 90 seconds, the display will return to Alarm & Time setting. Time setting mode: - Press [SET] key to go to Set Time mode.
- Page 12 Technical Specification Parameters & figures for each function:- a. Step counter: 0 to 99999 steps b. Calories burned: up to 9999.9 kcal in 0.1 kcal increments. c. Target step reminder: up to 99999 steps. d. Distance travelled: up to 999.9 km in 0.01- km increments. e.
- Page 13 Battery Replacement • To open the battery compartment, unscrew and slide out the battery compartment. (refer to picture in General Features' on page 2) • Remove the exhausted battery and replace with a new 1x LR1130 battery, observing correct polarity (as shown). •...
- Page 14 Lloyds Pharmacy Limited, Coventry CV2 2TX www.lloydspharmacy.com...
Need help?
Do you have a question about the GY6000 and is the answer not in the manual?
Questions and answers