Advertisement
seconds on CPU itself, the cursor will be flashing, then you can adjust the value
with the arrow keys and confirm with OK key. Now if you use the touch screen,
you can click the" Set" button on the touch screen, the cursor will be flashing
and you also can use the arrow keys to adjust the values and confirm with the
"ok" button on the touch screen.
Press "ok" key for 3 seconds, and adjust the value will arrow keys, then confirm
the value with "ok" key.
Notes:
1. The panel key on the touch screen only can output a trigger, it cannot output
a continuous HI signal even if you keep pressing it down for some time. That
means if you press
once (No matter how long you would press it down ),
the block
can merely output a short trigger.
4
Advertisement
