Adtec DVD/CD Duplicating Towers without Hard Drive Quick Start Manual

Quick Start Guide
Adtec DVD/CD Duplicating Towers without Hard Drive
1. Remove unit from its packaging and place it on a sturdy,
level surface. Keep all packaging for protection of your unit in
the event of transport. (Note: Warranty may be voided if the
unit is shipped in and with anything other than the original
packaging).
2. Take the power cord and attach the receptor end into the
back of the unit as shown.
The plug end should be plugged into a surge protector which
is then plugged into an electrical outlet.
3. Turn the power on by pushing the button, located at the
front bottom right corner of the unit, inward.
Thank you for purchasing Adtec. Your Adtec Duplicating Tower purchase is backed by our one year parts and service warranty.
Additionaly, lifetime technical support via email is included and available at:
support@wimmedia.com
4. Allow the system to boot up. When ready, 1. COPY should
appear on the LCD screen.
5. Load your master disc in the top tray.
6. Open the remaining trays and load with blank discs. If
all remaining trays are loaded and then closed, the unit will
begin copying automatically after several seconds. If any
trays are left empty, press
normal for any empty trays to open and close automatically
before copying begins).
7. When copying is complete, trays should open
automatically.
for copying to begin (Note: It is
TM