Panasonic Viera TX-L65WT600E Operating Instructions Manual page 14

Lcd tv
Hide thumbs Also See for Viera TX-L65WT600E:
Table of Contents

Advertisement

Available languages

Available languages

VIERA Touch Pad Controller
This touch pad controller is designed for the convenient operations, especially, on Home Screen or internet contents.
You can operate the TV intuitively with this controller.
The touch pad controller can be used by registering to this TV with Bluetooth wireless technology. Setup screen to
register will appear in "First time Auto Setup" for first using the TV.
After registering, you can operate the TV without pointing this controller at the TV (except Standby On / Off switch).
To use Standby On / Off switch, point the controller directly at the TV's remote control signal receiver because it
works with the infrared. (You can operate the switch without registration.)
It is recommended to speak within about 15 cm from microphone of VIERA Touch Pad Controller when using Voice
Control function.
1
2
3
4
5
6
7
8
Touch Pad
Tap the centre of the pad for "OK".
Installing / Removing batteries
Slide open
Note
It is recommended to hold the touch pad controller with your hand when using.
The battery power will be used whenever you use the touch pad controller (including the touch of the touch pad) even
if not operating the TV. It may decrease the battery life.
Some operations differ depending on the application.
14
1
Standby On / Off switch
Microphone
2
9
12
3
Microphone button
4
Touch pad (see below)
5
[Option Menu]
6
HOME
10
7
Volume Up / Down
8
APPS
11
9
On-screen remote control
10
Return
11
Channel Up / Down
12
OK
Slide your finger to move the cursor (on
internet contents or [Cursor Settings] in
[VIERA Touch Pad Controller] (Setup
Menu)), select the item, adjust levels, etc.
Close
(p. 16)
Same function of the remote control button 1 (p. 13).
Same function of the remote control button 17 (p. 13).
Same function of the remote control button 11 (p. 13).
Same function of the remote control button 5 (p. 13).
Press to display the remote control GUI (Graphical User
Interface). Press again to move the position of GUI. (To
change the page of GUI, slide your finger to the left / right
on the touch pad.)
Same function of the remote control button 20 (p. 13).
Same function of the remote control button 23 (p. 13).
Trace the fringe to scroll.
Note the correct polarity
(+ or -)

Advertisement

Table of Contents
loading

Table of Contents