Table of Contents
Advertisement
Quick Links
Thank you for purchasing this TempMinder® Model MRI-101AG. We hope you enjoy its many features and
benefits for years to come.
FEATURES:
Weather forecast (in 4 icons)
12/24hr time display
Calendar (date, week, year to 2099!!)
Alarm & Snooze
Indoor temperature & humidity
Outdoor temperature
Min/Max memory for indoor temperature & humidity
Min/Max memory for outdoor temperature
Outdoor temperature alert
Indoor temperature alert
Indoor humidity alert
DST (Daylight saving time)
Cable Sensor: 180cm
Weather forecast
time
date
Outdoor temperature
Alert icon of Outdoor
temperature
Indoor temperature
Getting Started:
A) The numbers will not change unless you remove the static label covering the front display as
well as the clear plastic insulation strip sticking out the back of the unit. The insulation strip
was inserted so that the batteries did not drain prior to you taking it home!
B) So, remove the strip. If the unit does not immediately "BEEP", remove the battery cover and
press on both batteries. This will confirm their proper installation and connection. Replace the
battery cover. In a year or so, you'll need to replace the two LR1130/AG10 button cells. When
TEMPMINDER® MRI101AG
Instruction Manual
The Main Display
Alarm icon
Snooze icon
Day of week
Indoor humidity
Alert icon of indoor
temperature &humidity
Advertisement
Table of Contents
Related Manuals for TempMinder MRI-101AG
Summary of Contents for TempMinder MRI-101AG
- Page 1 TEMPMINDER® MRI101AG Instruction Manual Thank you for purchasing this TempMinder® Model MRI-101AG. We hope you enjoy its many features and benefits for years to come. FEATURES: Weather forecast (in 4 icons) 12/24hr time display Calendar (date, week, year to 2099!!) Alarm &...
- Page 2 Be sure to keep these instructions as you will need them again when you replace the batteries as well as for all the other features/benefits of this HOME® brand TempMinder®. Reading the Minimum and Maximum History: After a certain period of time (overnight, a day, week, month, etc) you can see the highest and lowest temperatures as well as the humidity attained during that period.
- Page 3 IN and OUT areas of the display. To de-activate the alerts, simply press and hold the “DOWN” button. 6) When a temperature or humidity point has been exceeded, the TempMinder® will “Beep” for 5 seconds per minute until you press any button or the value being monitored returns to normal.
- Page 4 DST (Daylight Savings Time) Function: This function allows you to quickly change the time (up or down) by one hour. Press and hold the “set” button for 3 seconds. When the 12hr is flashing, press and release the “set” button SIX times. If “ON”...
- Page 5 - This unit is accurate to +/- 2.0 ºF/1.0ºC. Due to component tolerances plus other variables, the in and out temperatures may not always be exactly the same. - “HOME®” is a registered trademark of Home Hardware Stores Ltd. - “TempMinder®” is a registered trademark of The Minder Research Incorporated - © 2010 The Minder Research Inc...
Need help?
Do you have a question about the MRI-101AG and is the answer not in the manual?
Questions and answers